cub 154 lo boy
I removed clutch and flywheel, found another little surprize, the flywheel has a budweiser can cut out and used as a sleeve
inside the flywheel hub, the flywheel was on good , with no noticeable movement. do I use,or try find new flywheel?? thanks,Jim
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
model 154 flywheel
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: model 154 flywheel
On machines i like things to be perfect. I wonder if a bronze or brass bushing can be found to replace the beer can?
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: model 154 flywheel
thanks, Ill look for a better beer can bushing, Jim
-
- 10+ Years
- Posts: 2783
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: model 154 flywheel
That's a pretty creative bushing. Powered by Budweiser.
Might want to leave the can and rename the tractor to "Bud"
Might want to leave the can and rename the tractor to "Bud"
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 233
- Joined: Sun Jul 20, 2003 6:16 pm
- Zip Code: 38506
- Tractors Owned: Cub demo
- Location: Cookeville, TN
Re: model 154 flywheel
I believe I have an extra if you need a replacement. Did it have a bolt or pin through the hole. Check the input shaft, it may be worn and would ruin the replacement plate.
Dave
Dave
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 10 guests