This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
154 hydraulic question again
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
154 hydraulic question again
I see that the hydraulic lift cylinder is a single acting cylinder, and the hydraulic control valve is single acting, does this mean when I pull down on the control handle, I have fluid moving at pressure, and causes lift cylinder to extend, but when I raise up on the handle, the pressure in the cylinder line drops, and the lift cylinder pushes the fluid out and lowers, Thanks,Jim
- Rick Prentice
- Team Cub Guide
- Posts: 5636
- Joined: Mon Nov 01, 2004 7:24 am
- Zip Code: 43528
- Tractors Owned: 47(circle cub),48(Floyd backhoe),49,,51,54 and another 55
- Circle of Safety: Y
- Location: OH, Holland
- Contact:
Re: 154 hydraulic question again
Jim, yes. And, The more weight you have hanging, the faster the cylinder will retract. It may not move that much with nothing hanging to pull it down.
Rick
Rick
When I told my dad I've been misplacing things and doing stupid stuff----His reply---"It only gets better"
-
- 10+ Years
- Posts: 259
- Joined: Mon Jan 12, 2004 9:58 pm
- Location: CNY
- Contact:
Re: 154 hydraulic question again
When you pull the lever you move the spool in the valve shutting off the flow of oil through the valve and directing oil to the cylinder causing it to extend.
Whe you push the lever you move the spool opening a path from the cylinder to the reservoir. The cylnder is retracted by the weight of the load and/or spring force.
Whe you push the lever you move the spool opening a path from the cylinder to the reservoir. The cylnder is retracted by the weight of the load and/or spring force.
-
- 10+ Years
- Posts: 957
- Joined: Tue Dec 18, 2007 8:18 pm
- Zip Code: 55325
- Tractors Owned: 1958 ih 340 utility
1950 farmall cub
1948 ford 8n
kubota 3240
IH 154 loboy - Location: Dassel, Minnesota
Re: 154 hydraulic question again
thanks, when I stop and think about it for a moment, it all makes sense. JIM
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: 154 hydraulic question again
I notice on all the 154's its all single action cylinders. There's no down pressure like on the fcub's. Its the weight of the attachment or loading the spring pressure more so we have more down pressure on the 154's. There very similair to the 4 way snowplows.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 8 guests