This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link:
Privacy Policy

NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.

Newbee 184-1050 Loader

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Guy41
10+ Years
10+ Years
Posts: 13
Joined: Thu Jun 03, 2010 8:31 pm
Zip Code: 48881
Tractors Owned: 1977 184 Loboy

Newbee 184-1050 Loader

Postby Guy41 » Thu Jun 03, 2010 11:19 pm

Hello,
I believe it was 1977 when I bought a new IH 184 LoBoy to mow around my parent’s farm, plow snow, and haul wood. My father loved the little red tractor so much my mother asks me every time I mowed if I would sell it to her so she could give it to him for his birthday. Finally in 1979 I sold it to her when I moved away. I wanted to just give it to them but I was young and needed some money to get a start on my own. Anyway, last week my Dad stopped over while I was searching on Craig’s List for a garden tractor loader and he asks me to check and see what people were asking for LoBoys. I was surprised he was thinking of selling the little tractor as he always kept it waxed and stored inside but after he explained how he stopped using it after some clutch issues and starting problems a couple years back and how his health kept him from doing much I understood his reasoning. Then while searching for his prices I ran across a loader for the 184. I showed the loader to him and before he left he offered me a deal on the tractor if I wanted it to mount a loader to it. Well today I went to see the loader. The guy that had it was going to adapt it to another tractor and had cut the mounting plates off with a sawz-all. Before he did anymore to it he decided to just sell it. The cuts were clean and the pieces mated together well. Everything was there with the exception of the two support braces that run back to the axle. He said the guy he bought it from didn’t have them. The bucket didn’t show any wear, all the pins were tight, and it even had the original paint and decals. I guess you know it followed me home. In fact I was quite excited on the way back thinking about getting the little red tractor back and having a loader to mount on it. Only problem is I can’t find a good picture of the rear supports detailing where they mount on the axle. I figure they will be easy to fabricate if I know where they go. The parts list I found online shows pictures of the parts but it doesn’t show the actual mounting location for the axle. The pictures don’t show the mounting location for PTO driven pump either. I know it will be easier to tell when I get the tractor home but if anyone should have a picture they would like to share I would be thankful.
Bill

SPONSOR AD

Sponsor



Sponsor
 

User avatar
Bigdog
Team Cub Mentor
Team Cub Mentor
Posts: 24144
Joined: Sun Feb 02, 2003 12:50 pm
Zip Code: 43113
Circle of Safety: Y
Location: OH, Circleville
Contact:

Re: Newbee 184-1050 Loader

Postby Bigdog » Fri Jun 04, 2010 6:01 am

Bill - welcome to the forum and congratulations on getting your 184 back. I can't help with the brackets but there is a Yahoo Group for numbered lo-boys and I know some of the guys there have 1050 loaders. There may even be some pictures in the photo folders.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.

My wife says I don't listen to her. - - - - - - - - Or something like that!

Image

http://www.cubtug.com

Guy41
10+ Years
10+ Years
Posts: 13
Joined: Thu Jun 03, 2010 8:31 pm
Zip Code: 48881
Tractors Owned: 1977 184 Loboy

Re: Newbee 184-1050 Loader

Postby Guy41 » Fri Jun 04, 2010 7:54 am

Thanks Bigdog, I will check out Yahoo Groups.

User avatar
b52c130
10+ Years
10+ Years
Posts: 188
Joined: Wed Sep 03, 2008 4:35 pm
Zip Code: 07869
Location: Randolph, NJ

Re: Newbee 184-1050 Loader

Postby b52c130 » Fri Jun 04, 2010 10:55 am

Guy41,
I just sent you 8 pictures via email that should help you out.
NJDale

Guy41
10+ Years
10+ Years
Posts: 13
Joined: Thu Jun 03, 2010 8:31 pm
Zip Code: 48881
Tractors Owned: 1977 184 Loboy

Re: Newbee 184-1050 Loader

Postby Guy41 » Sun Jun 06, 2010 12:15 am

Thanks for the pictures NJDale,

they show a lot more detail then the illistrations I found. Espically the one of the rear braces and the mounting of the pump. Were those before and after pictures? If so you did a nice job restoring the loader.

I'm going to check the tractor out tomorrow and try to get it started. If the clutch issue isn't serious I might drive it home. It's about 14 miles from Dads place to mine so it should be an interesting trip.

Thanks again NJDale.

User avatar
b52c130
10+ Years
10+ Years
Posts: 188
Joined: Wed Sep 03, 2008 4:35 pm
Zip Code: 07869
Location: Randolph, NJ

Re: Newbee 184-1050 Loader

Postby b52c130 » Sun Jun 06, 2010 7:46 am

Guy 41,
You are welcome. No, none of those pictures are of any thing that I (my son) owns. My son has a 184 out in Colorado that he and I have done quite a bit of work on. As a result of this, whenever I am looking around on the web I "right Click" any interesting pictures (mostly from ebay) and save them to a library of Numbered Loboy Pictures. I now have several thousand pictures of parts and accessories for these tractors accumulated and am happy to help people out with them.
Good Luck, NJDale

Guy41
10+ Years
10+ Years
Posts: 13
Joined: Thu Jun 03, 2010 8:31 pm
Zip Code: 48881
Tractors Owned: 1977 184 Loboy

Re: Newbee 184-1050 Loader

Postby Guy41 » Mon Jun 07, 2010 11:34 am

I went over to Dads to check the tractor out. Had to hold my hand over the carb to get enough fuel up to get it started. Even after starting it would only run with the choke pulled. The motor sounded good though and seemed to run storng even with the carb issues. I remember the tractor always having some blowby but thee was blue smoke comming through the crankcase breather. I'm hoping it's from being parked and the old oil because it looks like he hasn't changed it in a long time and it smells of gas. It was still close to the full mark so maybe some fresh oil and some run time will help. I didn't drive it home because something in the clutch assembly is clattering like metal on metal whenever the clutch pedal is pressed down. It's quiet with the pedal released. He said he parked it because of the noise after installing a new pressure plate, throwout bearing and clutch plate. He said it was making noise with the old clutch assembly too which didn't sound right. I pulled the top cover off and found the u joint is shot and there is a lot of play at the pilot bushing. I'll tear it down this weekend after we trailer it home. I got my fingers crossed but it looks like it might turn out a bigger project than I expected. Oh Boy Lo Boy!

User avatar
b52c130
10+ Years
10+ Years
Posts: 188
Joined: Wed Sep 03, 2008 4:35 pm
Zip Code: 07869
Location: Randolph, NJ

Re: Newbee 184-1050 Loader

Postby b52c130 » Mon Jun 07, 2010 7:29 pm

Guy41,
Pilot Bearing - NAPA BRG6202RSJ - $7.99
Universal Joint - NAPA P338 - $11.21
NJDale

outdoors4evr
10+ Years
10+ Years
Posts: 2783
Joined: Tue Jul 22, 2008 12:44 pm
Zip Code: 48370
Tractors Owned: 184
Location: Oxford, MI

Re: Newbee 184-1050 Loader

Postby outdoors4evr » Thu Jun 10, 2010 9:01 am

The U-Joint from NAPA that NJDale recommended fits like a glove. Took about 2 hours for me to change + another hour to reinstall the driveshaft.

Hope you really enjoy your reclaimed 184!
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade

Guy41
10+ Years
10+ Years
Posts: 13
Joined: Thu Jun 03, 2010 8:31 pm
Zip Code: 48881
Tractors Owned: 1977 184 Loboy

Re: Newbee 184-1050 Loader

Postby Guy41 » Fri Jul 02, 2010 5:38 pm

Thanks for the info on the part numbers at NAPA. School has kept me so busy I haven't had a chance to get the tractor home. However, dad towed it up to his garage and pulled the clutch assembly. Before he parked it the T/O bearing fell apart and he bought a new one along with a pressure plate and clutch disc form a dealer that was going out of business. Anyway, they sold him the wrong pressure plate for the 184 and he installed it because the dealership insisted it was the correct replacement. The clutch was correct but the rivets for the lining facing the flywheel sheered. The flywheel wasn’t affected, the T/O bearing is still good but the drive shaft came in contact with the fingers from the pressure plate. The teeth on the shaft are gouged but the teeth in the area that drives the clutch look like they are in good shape. I am going to try and post a picture in case anyone knows for sure the shaft is good enough to put back in.
BTW, thanks everyone for all the information. This is a great forum!

Bill
Attachments
184 Drive Shaft.jpg

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Newbee 184-1050 Loader

Postby Rudi » Fri Jul 02, 2010 9:09 pm

Bill:

A little late getting in on the thread, but anyhooo...

Is this the on-line parts catalog you were referring to ? 1050A Loader

Don't have a lot on the Numbered Lo-Boys but it is coming along. I do have a somewhat ok Owner's Manual (Jen Sales) for the 184. Other stuff will come along as I find it or folks volunteer the data. There is also a so-so Service Manual on the server as well - it is the IH-50 2004 Edition Complete Shop Manual which has a section on the Numbered Cubs such as the 184.

Image to the Farmallcub.com :big smile: Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to :arrow: the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. You may also wish to check out the CubFests and Gatherings Calendar 2010 to find a gathering of fellow members where Cubs, Friends and a good time is shared by all. Enjoy!.
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Guy41
10+ Years
10+ Years
Posts: 13
Joined: Thu Jun 03, 2010 8:31 pm
Zip Code: 48881
Tractors Owned: 1977 184 Loboy

Re: Newbee 184-1050 Loader

Postby Guy41 » Fri Jul 02, 2010 11:36 pm

Hi Rudi,

Thanks for the links. Yes, that was the cataloge with the pictures I saw. A copy came in handy when buying the loader to see what was missing. The parts diagram for the loader had some good illstrations of the missing rear support bars on page 3, part #3. Thanks to the pictures NJDale sent, I have an idea how to construct and mount them at the rear.

Dad still has a copy of the original manuals that came with the tractor. Would that be something you could post?

Bill

User avatar
Rudi
Cub Pro
Cub Pro
Posts: 28706
Joined: Sun Feb 02, 2003 8:37 pm
Zip Code: E1A7J3
Skype Name: R.H. "Rudi" Saueracker, SSM
Tractors Owned: 1947 Cub "Granny"
1948 Cub "Ellie-Mae"
1968 Cub Lo-Boy
Dad's Putt-Putt
IH 129 CC
McCormick 100 Manure Spreader
McCormick 100-H Manure Spreader
Post Hole Digger
M-H #1 Potato Digger
Circle of Safety: Y
Twitter ID: Rudi Saueracker, SSM
Location: NB Dieppe, Canada
Contact:

Re: Newbee 184-1050 Loader

Postby Rudi » Sat Jul 03, 2010 3:57 pm

Guy41 wrote:Hi Rudi,
Dad still has a copy of the original manuals that came with the tractor. Would that be something you could post?

Bill


Bill:

Please :!:
Confusion breeds Discussion which breeds Knowledge which breeds Confidence which breeds Friendship


Red184
10+ Years
10+ Years
Posts: 1
Joined: Tue Nov 01, 2011 10:35 am
Zip Code: 61275

Re: Newbee 184-1050 Loader

Postby Red184 » Tue Nov 01, 2011 10:47 am

I know I'm digging up a year old post but I was hoping you still had those 7 pics detailing the install of the rear braces. I picked up a 184 this summer and a 1050a that had been on a 154. I have the rear braces with mine, but when trying to install them I keep running into the mid lift arms so I can't get the holes to line up with the main front supports.

Thanks!


Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 15 guests