IH CUB LoBoy Series - 154, 184, 185 Discussion Forum
Moderator: Team Cub
by DanBuckman » Mon Sep 06, 2010 8:18 pm
On the right side of my creeper housing (side the brake pedal is on) there are two grease fittings. I'm guessing someone replaced plugs with them? Wouldn't think it would take grease as it's already running in oil. I was also wondering if the creeper is sealed from the transmission or oil is common.
-
DanBuckman
-
- Posts: 23
- Joined: Mon Dec 07, 2009 2:39 pm
- Zip Code: 18942
by outdoors4evr » Tue Sep 07, 2010 11:27 am
The creeper is separate from the transmission. The oil reservoirs are also separate. Each must be maintained and filled. There should be no grease fittings and the oil inside should be hytran or equivalent.
184 w/ Creeper & 3-Point IH Model 15 Tiller
-
outdoors4evr
- Cub Star!!

-
- Posts: 435
- Joined: Tue Jul 22, 2008 12:44 pm
- Location: Davison, MI
- Zip Code: 48423
- Tractors Owned: 184
by DanBuckman » Tue Sep 07, 2010 1:19 pm
Thanks, that's kind of what I thought but it's been leaking lots of fluid out the lower grease fitting. or at least some of it was leaking out there, (I cleaned it and a run appered there). Possible some is also leaking between the two housings. It started leaking after I topped off the transmission. Perhaps a seal between them is bad.
-
DanBuckman
-
- Posts: 23
- Joined: Mon Dec 07, 2009 2:39 pm
- Zip Code: 18942
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: No registered users and 2 guests
|
|