IH 184 Loboy final drive oil FillModerator: Team Cub
4 posts
• Page 1 of 1
IH 184 Loboy final drive oil FillTo drain the oil from the lo-boy finals it appears that you must remove the housing pan. How do you get the right amount of oil back in the final, since the cub fill plug is on the low side?
Re: IH 184 Loboy final drive oil FillJust fill to the level of that plug hole. the final drives don't require a whole lot of fluid.
Re: IH 184 Loboy final drive oil FillThere is another fill plug up on the rear of the final drive, facing the rear of the tractor, number 3 on the image below. That should be the correct fill plug, not the lower one that you use on a Farmall Cub.
![]() 1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
Re: IH 184 Loboy final drive oil FillThanks. The manual that I"m looking at seems to have forgotten the fill-up part. I'll check that out as I'm doing some re-wiring of the lights and switches.
Bill S.
4 posts
• Page 1 of 1
Return to LoBoy Series - 154, 184, 185 Who is onlineUsers browsing this forum: No registered users and 2 guests |
|