Farmall Cub

Thanks for the education with previous posts and manuals. I recently purchased a carb kit and battery cover from the dealer and sent both back - the kit was $96 and the battery cover 174 , I just cannot justify the gouging . I have read posts of rebuilders on the site and thanks for the previous how to. The unit is running and i continue to massage it - in hopes that it will handle the grass chores . I did notice it runs well on 90 octane and when you introduce the deck to the motor it sometimes does not recover from govenor . Fuel bowl level good , govenor moving to compensate . timing good . I am not currently having any start problems but is electroni ignition a good change to make and who produces such a kit or is there a performance benefit ? thanks again for all the imput from the years of experience on this board - making it simpler for the next . By the way i did make a call to Cecil over a carb rebuild and he was excellent in his quick advise and i wanted to send the carb and went on to trans , oil, brakes and now i am back at making it run excellent -

Welcome.

Which model Cub do you own?

Lack of power. Conduct a complete tune up including compression test, valve tappet clearance, etc.

90 octane fuel. No need to use the expensive stuff. Plain old regular 87 octane gasoline is fine.

Electronic ignition. Standard ignition system works quite well. My opinion, the electronic ignition system is not worth the added expense. Others have noticed an increased performance with the electronic ignition.

Plus, the electronic ignition system will not solve other engine problems.

a 154 model 3160 deck

Kelly:

to Farmallcub.com Forum Family. And you have come to the right place for all things Cub related. If you click on the Site Rules, Regulations, & Important Information, it will point you to the Welcome Wagon wherein you will find links to many useful sites and topics. One of which is the Cub Manual Server. Enjoy!.

As I have mentioned before I don't have a lot of stuff on the server for the Numbered Series Lo-Boys but I do have some stuff on the 154 and there is the Parts Catalog for the IH 3160 Rotary Mower. Hope that is helpful.