This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
plow bracket
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
plow bracket
could anybody give me these dimensions of the bracket in pic . i have everything but that l bracket and i need to make one thanx steve
-
- 10+ Years
- Posts: 55
- Joined: Mon Aug 02, 2010 1:05 pm
- Zip Code: 22802
- Tractors Owned: Cletrac HG-42 1945
Oliver HG-68 1946
M-F MF50 1959
IH 184 Loboy 1977
Farmall F Cub 1949
Farmall Cub 1957
No 1 Platform Carrier
L-F194 Plow - Location: Rockingham County, VA
Re: plow bracket
Do you have the bracket for the left side? The left bracket on my 184 looks to be a mirror image of the right bracket. The holes appear to be at the same locations. Just the bend at the bottom is reversed.
Bill Shaver
Bill Shaver
IHCC of Virginia, Chapter 41
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: plow bracket
bill thanx for the reply , i dont have either side or bottom, any side you could give dimmensions of would be gratefull .like you said just the bend is different.thanx steve
-
- 10+ Years
- Posts: 55
- Joined: Mon Aug 02, 2010 1:05 pm
- Zip Code: 22802
- Tractors Owned: Cletrac HG-42 1945
Oliver HG-68 1946
M-F MF50 1959
IH 184 Loboy 1977
Farmall F Cub 1949
Farmall Cub 1957
No 1 Platform Carrier
L-F194 Plow - Location: Rockingham County, VA
Re: plow bracket
I can give you the basic measurements. The plate is 5/16 thick X 12.5 in wide X 14 in long. The top arm ( to the tractor frame) is 4 + 11/16 in. wide and the vertical arm is 3 + 7/16 in. wide The bent sections are 2 in wide for the cross plate to set on. The only hole that you can't get a dimension on is the single hole on the lower leg, that is 9.5 in from the top edge and 3/4 in in from the rear edge. I'm not sure on how to copy a drawing to this post. Send me a PM and I send it that way if needed. All holes are drilled for 1/2 in bolts.
Bill
Bill
IHCC of Virginia, Chapter 41
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: plow bracket
bill thank you very very much those measurements those will work fine. thanx for taking the time to do it ..steve
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: plow bracket
Where are you located? I may have some parts. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: plow bracket
im in western ny on the pa border how much for the two L brackets if ya wanna part with em
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: plow bracket
bought the steel to make the two l brackets 55 bucks for 5/16 steal plate
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: plow bracket
I'll have to llook for what i have. I'll give them to you for the postage only what ever i have. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: plow bracket
BigBill wrote:I'll have to llook for what i have. I'll give them to you for the postage only what ever i have. Bill
thanx bill they can be built ,,,but bolt on and go is much better i need the l brackets, and the cross over piece that connects the 2 together ,, i seen em on ebay once and forgot to bid on em steve
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: plow bracket
I think i have the left side only, if you want it let me know i may have the center section too. I'm looking. I need your address if you want it. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: plow bracket
BigBill wrote:I think i have the left side only, if you want it let me know i may have the center section too. I'm looking. I need your address if you want it. Bill
pmd ya my address bill steve
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 9 guests