I broke it
Moderator: Team Cub
3 posts
• Page 1 of 1
I broke it
by bill-b » Wed Feb 02, 2011 4:35 pm
I took the carb off an cleaned it .Got it started an the idle was high about 1000 rpm noticed the thortle on the side of the govner was sticking sprayed with lube an still stiff pry it down an the third time it snaped just below the cable . how do i take the outer cover of the govner off?
- bill-b
- Posts: 3
- Joined: Sat Aug 28, 2010 9:52 pm
- Zip Code: 98277
Re: I broke it
by Bigdog » Wed Feb 02, 2011 7:53 pm
Remove the two bolts and tap lightly with a hammer. It will pop off.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
3 posts
• Page 1 of 1
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: No registered users and 1 guest
|
|