engine 154

Sun Feb 06, 2011 3:02 pm

Hello guys, I have gotten my mitsabish deisle running, 23 horse,3600rpm. may start next couple of weeks to put in my other 154cadet. measurement show easy fit. getting ready to show old one and new one

Re: engine 154

Sun Feb 06, 2011 3:31 pm

A pictorial history of the build would be great!

Re: engine 154

Sun Feb 06, 2011 3:46 pm

cool post pics of that project. whats the motor out of??? another tractor

Re: engine 154

Tue Feb 08, 2011 7:14 pm

There will be post made, but not for 3or4 weeks.By doing this I`ll have to put a power steering pump in for hydralics also. The first pic will be the two engine sitting side by side, the engine for what i have been told is out of a golf course piece of equipment. It was givin to me.

Re: engine 154

Wed Feb 09, 2011 9:09 am

I've seen a couple 154's with diesel conversions. One, I think was a Yanmar (if I remember correctly) the other was a very nicely done Perkins conversion (even had diesel decals made for it.) My brother tried to convince me to use a number series for my conversion but I wanted to convert the F-Cub. Looking forward to pics of your conversion.

Re: engine 154

Wed Feb 09, 2011 11:23 am

Was looking at the back cover of Ken Updikes yellow Cub book and thinking about Gary's Cubota. A diesel 184,185 would make a nice mowing tractor!

Re: engine 154

Wed Feb 09, 2011 12:43 pm

My intensions are also to try and put a hydro unit from a walker zero steer in front of my clutch assemb, hopping for a great advantage on the speed control just going to try. Have to remove the loader first. Have one with a isuzu diesle in it also. This one had been in a fire and all I got was the fram rearend and front axil;the peddles had been cut off it works real good.

Re: engine 154

Fri Feb 25, 2011 7:02 pm

got engine out of 154, set side by side, have pic`s try and put them on tomorrow, engine will set forward more than the gas, will give me more room to put the hyd. pump.

Re: engine 154

Mon Mar 07, 2011 9:28 pm

Hey guys tride to put pic on but couldn`t do it. upgrade the program and we will try again

Re: engine 154

Wed Mar 09, 2011 8:16 am

There is pics of the 154 hydro unit on the 154/185/184 loboy forum in the pics there. It looks like a factory prototype setup. Bill