This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
engine 154
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 26
- Joined: Thu Apr 29, 2010 5:25 pm
- Zip Code: 62033
engine 154
Hello guys, I have gotten my mitsabish deisle running, 23 horse,3600rpm. may start next couple of weeks to put in my other 154cadet. measurement show easy fit. getting ready to show old one and new one
- Bigdog
- Team Cub Mentor
- Posts: 24144
- Joined: Sun Feb 02, 2003 12:50 pm
- Zip Code: 43113
- Circle of Safety: Y
- Location: OH, Circleville
- Contact:
Re: engine 154
A pictorial history of the build would be great!
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
- 10+ Years
- Posts: 68
- Joined: Mon Nov 29, 2010 8:05 am
- Zip Code: 14733
Re: engine 154
cool post pics of that project. whats the motor out of??? another tractor
-
- 10+ Years
- Posts: 26
- Joined: Thu Apr 29, 2010 5:25 pm
- Zip Code: 62033
Re: engine 154
There will be post made, but not for 3or4 weeks.By doing this I`ll have to put a power steering pump in for hydralics also. The first pic will be the two engine sitting side by side, the engine for what i have been told is out of a golf course piece of equipment. It was givin to me.
-
- Team Cub Mentor
- Posts: 5618
- Joined: Thu Aug 03, 2006 6:20 am
- Zip Code: 43358
- Tractors Owned: 48 Cub Diesel (Cubota)
53 Cockshutt 20 restored (Shooter)
52 Cockshutt 20 unrestored
47 Leader "B" (Herckie)
49 Leader "D" (Princess)
49 Leader "D" very rough
48 Leader "D" unrestored
Kubota B6200E
Kubota B6200HST
Kubota B8200HST-D - Circle of Safety: Y
- Location: OH West Mansfield
Re: engine 154
I've seen a couple 154's with diesel conversions. One, I think was a Yanmar (if I remember correctly) the other was a very nicely done Perkins conversion (even had diesel decals made for it.) My brother tried to convince me to use a number series for my conversion but I wanted to convert the F-Cub. Looking forward to pics of your conversion.
-
- 10+ Years
- Posts: 3369
- Joined: Mon Feb 17, 2003 8:48 pm
- Zip Code: 28081
- Circle of Safety: Y
- Location: NC, Kannapolis
Re: engine 154
Was looking at the back cover of Ken Updikes yellow Cub book and thinking about Gary's Cubota. A diesel 184,185 would make a nice mowing tractor!
"I'd rather be a mechanic in the shop"- Henry Ford
252646 & 221525. 195897 (Gone, but not forgotten)
252646 & 221525. 195897 (Gone, but not forgotten)
-
- 10+ Years
- Posts: 26
- Joined: Thu Apr 29, 2010 5:25 pm
- Zip Code: 62033
Re: engine 154
My intensions are also to try and put a hydro unit from a walker zero steer in front of my clutch assemb, hopping for a great advantage on the speed control just going to try. Have to remove the loader first. Have one with a isuzu diesle in it also. This one had been in a fire and all I got was the fram rearend and front axil;the peddles had been cut off it works real good.
-
- 10+ Years
- Posts: 26
- Joined: Thu Apr 29, 2010 5:25 pm
- Zip Code: 62033
Re: engine 154
got engine out of 154, set side by side, have pic`s try and put them on tomorrow, engine will set forward more than the gas, will give me more room to put the hyd. pump.
-
- 10+ Years
- Posts: 26
- Joined: Thu Apr 29, 2010 5:25 pm
- Zip Code: 62033
Re: engine 154
Hey guys tride to put pic on but couldn`t do it. upgrade the program and we will try again
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: engine 154
There is pics of the 154 hydro unit on the 154/185/184 loboy forum in the pics there. It looks like a factory prototype setup. Bill
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 8 guests