Thu Feb 24, 2011 10:33 pm
I have a 1970 Cub Lo Boy 154 with a simple ball hitch. I am trying to figure out the best way to drag a sub soiler or digging bar or any other tow behind implements. Are there any that work with the old lo boys or is everything set up for 3 point now?
Thu Feb 24, 2011 10:42 pm
I have a trailer with a ball hitch that I tow with a standard Cub. Can't think of any ag implement that utilizes a ball hitch. You could remove the ball and use the drawbar hole with a pin through the tongue of a lot of tow behind equipment.
Fri Feb 25, 2011 7:48 am
Thanks for the response. I have a trailer that I tow with mine by removing the ball pitch. I was curious to see if there were any Ag implements that around for tilling or cultivating that can be used without a 3 point.
Fri Feb 25, 2011 8:07 am
23A disk, might be hard without ag tires though.
Fri Feb 25, 2011 8:55 am
WestDeerPirate wrote:Thanks for the response. I have a trailer that I tow with mine by removing the ball pitch. I was curious to see if there were any Ag implements that around for tilling or cultivating that can be used without a 3 point.
OK. Miss understood the initial question. There are quite a number of small ag implements that could (might) be pulled by your tractor. Think along the lines of horse drawn and ground powered equipment; hay rakes, disk harrows, peg/spring toothed harrows, trailer type plows, sickle bar mowers, reel mower, and I'm sure more. Qualification. Lot of variables. An individual piece of equipment may not be a good match for your tractor.
Sun Feb 27, 2011 11:29 am
i picked up four pull behinds that work just gotta keep small..anybody try a box blade grader //or a york rake... off the 3 point
Mon Feb 28, 2011 1:05 pm
I have a 3-point 6 foot blade that I use. Works ok & is easy to use as long as you aren't dragging snow off to one side. The front end is too light and the blade just drags the front end around. Pushing snow backward works well.
Thu Mar 03, 2011 9:45 am
You may find a lot of tow-behind products that have been marketed to 4-wheelers to be a good fit for the 154.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.