Switch to full style
IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Re: Will This Mower Work on my 1970 154 Cub?

Tue May 03, 2011 12:58 pm

Just following up. The answer was YES. I wound up leaving the blades alone and simply switching around the mower deck. It turned out to be a Danko mower once I turned it over. The ski's bolted up correctly as did the legs that bolt to the underside of the tractor bracket in the rear. I did not need any new brackets or anything custom made as someone mentioned previously. Once I had the deck turned around with the flat side forward it has been perfect. I wound up having to use a MTD belt from Tractor Supply for a 50" deck. Adjusted the pulleys in the rear below the PTO to tighten it up some. Good to go.

Image

Re: Will This Mower Work on my 1970 154 Cub?

Tue May 03, 2011 6:59 pm

Might be wrong . . .

Doesn't the blockoff plate go on the LH side so the grass exits the right because I think they turn sharper to the left?

Otherwise . . . NIIIIIIICE . . .
Post a reply