Page 1 of 1
RPM
Posted: Wed Mar 23, 2011 7:48 pm
by bill-b
Can some one tell me what the idle rpm an high rpm are on a 73 154 ?
Re: RPM
Posted: Wed Mar 23, 2011 8:16 pm
by Bob McCarty
http://www.cleancomputes.com/Cub/Number ... e%2056.jpg Here's the page from the Owner's manual on the server.
Bob
Edit: Why are the PTO shaft speeds slower than the engine speeds?
Re: RPM
Posted: Thu Mar 24, 2011 6:32 am
by Gary Dotson
Bob, the PTO on # series is belt driven, I guess there's a slight difference in pulley size.
Re: RPM
Posted: Sun Apr 03, 2011 11:40 pm
by chugah chugah
I noticed that today as I got in there on my new to me- old 154 because the fan belt pto was noisy- very loose! Tightened it up to deflect finger 1/16th deflection - there are some oil leaks down there that I have to chase Also cant seem to access the hydraulic reservoir for the bucket- its a slot head bolt from the look of it?
dont want to screw it up so will get BIG screwdriver on it tomorrow and make sure level is up to 5 1/2 in from top as manual says
