Switch to full style
IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Forum rules

Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Post a reply

Cooling System Sealer

Wed Apr 06, 2011 7:08 pm

What would be the best sealer to use to seal up a small leak in a Cub 154 Lowboy cooling system. Seems to have a small radiator leak. Would like to get buy for a while till I find a better radiator, looks like mine found a tree at one time in it's life.

Re: Cooling System Sealer

Sat Apr 09, 2011 7:48 pm

solder it with an electric soldering iron like we did in the old days. You could also use a low temperature solder too so you won't need to heat a big area. Since these don't have water pumps to circulate the water i wouldn't use any type of radiator sealer. There are some JB weld products out there too but i'm not sure which one would work. These coolant systems are very fragile (thats italian) and i wouldn't play with it if its over heating because it could cause more damage than just the radiator. My point is to repair it correctly. Bill

Re: Cooling System Sealer

Mon Apr 11, 2011 8:40 am

I used a powdered stop leak on my 154 for several seasons. Eventially replaced the radiator. The stop leak did work for a season and needs to be added with the engine hot then run for a while to circulate since the flow is slower in a convection system.
Post a reply