When using my old Cadet 124 it is easy to raise the mower to other height settings
for different areas. The lowboy series has only the stop bolt for the lowest setting.
Has anyone thought of building some type of gauge to read when the mower is set
at some position higher than the stop bolt setting? I was thinking of something like a rod
with numbers attached to the deck up through a bracket with a hole. Or maybe something else.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
Mower Height Gauge
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4
- Joined: Fri Apr 15, 2011 7:28 am
- Zip Code: 17362
-
- 10+ Years
- Posts: 134
- Joined: Tue Aug 03, 2010 11:34 am
- Zip Code: 46975
Re: Mower Height Gauge
I'll take a wild butt guess here and say it might have to do with the multitude of different mower decks that can be fitted them.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 5 guests