IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Fri May 06, 2011 6:52 am
How do you guys change the rear axle fluid- remove both rear axle pan(alot of work) or use a syringe to suck it out?
Is there a gasket on the rear axle pans?
Fri May 06, 2011 7:07 am
Pull the pans & replace the gaskets.
I put mine back together with RTV (clean the mating surfaces well)
Fri May 06, 2011 6:00 pm
Yup same as with any of the other Cubs. Drop the pans, drain the oil, clean the pans and the rim, fill with the recommended amount of gear lube, install gasket (either dry or with Hy-Tack) and re-install. I don't have the GSS-1408 scanned yet so the I&T 38
will have to do. Here is the relevant page:
Sat May 07, 2011 10:11 am
Thanks to all!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.