Page 1 of 1
185 & 3260
Posted: Sun Sep 18, 2011 8:36 am
by Phazer
Just picked up the 3260 mower. Probably won't try to mount it until next spring. I'm a little confused on how the lift assembly mounts to the rockshaft, it was already off when I bought it.
Does anybody have a closeup picture of how it mounts? Either on a 185 or 184. This is the 2 belt deck, in case there is a difference between a 3260 & a 3250A.
Thanks in advance.
Ken
Re: 185 & 3260
Posted: Sun Sep 18, 2011 1:41 pm
by b52c130
- 3260 Mower left side, mounted
- 3260 Mower Deck Left Side.JPG (30.13 KiB) Viewed 582 times
Phazer, here are a couple of pictures that might help you - NJDale
Re: 185 & 3260
Posted: Sun Sep 18, 2011 4:43 pm
by Phazer
Hmmmmmm . . . I think that might be a 3160A pictured above.
Here's a link to the 3260 parts break down:
http://www.partstree.com/parts/?lc=cub_cadet&mn=3260+Rotary+Mower+-+Built+1969-1976&dn=0055700002. It would be #'s 11, 12, & 13. 11 or 12 sandwich onto the lift linkage from the pics I've seen
Thanks any way for the effort, I've saved those pics for future use if needed.
Re: 185 & 3260
Posted: Mon Sep 19, 2011 8:52 am
by outdoors4evr
That is definitely not a 3160A.
Re: 185 & 3260
Posted: Mon Sep 19, 2011 9:58 am
by b52c130
Phazer, Some other 3260 mounting linkage pictures - NJDale
Re: 185 & 3260
Posted: Mon Sep 19, 2011 7:22 pm
by Phazer
THAT"S IT ! ! ! THANKS ! ! !
What a nightmare when you don't get to see it in person before it's removed.
Thanks for everybodies responses.
Re: 185 & 3260
Posted: Thu Sep 29, 2011 6:52 pm
by BigBill
Yup thats how mine is connected too. Bill