Page 1 of 1
PTO speed and direction
Posted: Wed Feb 15, 2012 4:04 pm
by Matt Kirsch
Tried google, but kept coming up with porno sites and ebay...
The PTO on the numbered Loboy is also backwards and engine RPM, right?
Re: PTO speed and direction
Posted: Wed Feb 15, 2012 4:45 pm
by Harold R
Counterclockwise rotation. Low idle is listed at about 390 rpm, high idle listed at 1970 rpm.
That's what's listed in the owners manual under "specifications". With it being on a separate shaft,I'm not sure if it's exactly the same as engine RPM. Guess that would depend on the pulley sizes.
Re: PTO speed and direction
Posted: Wed Feb 15, 2012 11:05 pm
by RaymondDurban
From an earlier post a few threads down...
PTO speeds on a 184 and 185 are 2050 and 1880 rpm at high idle and under load.
PTO speed on a 154 is 1970 and 1800 rpm, high idle and under load....
Although I've never measured them, I suppose it's the offset pulley setup that slow the PTO down a bit from engine RPMs.
Re: PTO speed and direction
Posted: Sun Mar 18, 2012 8:17 am
by HAMILTONBOB
Good Morning
This little, expensive guy, on EBay is what changes a Numbered Cub PTO shaft size,rotation direction, and speed to a Standard Pto Usage
--"International cub reverser-reducer' item # 140722734931. Hamiltonbob