New addition to the family

IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

New addition to the family

Postby fordyford » Thu Mar 15, 2012 4:36 pm

Took delivery on this little jewel (IMHO) this week. Thanks to the previous advice I got on this forum.

Runs great, clean with no blow-by, with creeper gear, FEL and 3-point. New paint, also.
Gonna need tires eventually, but for now, it's going to work for it's room and board.

I'm officially the owner of a Gen-U-Wine 184 LoBoy. :{_}:

For better or worse :-:-):
Attachments
184 LoBoy 9.JPG
184 LoBoy 4.JPG
fordyford
 
Posts: 44
Joined: Sun Dec 18, 2011 5:25 pm
Zip Code: 37857

Re: New addition to the family

Postby RaymondDurban » Thu Mar 15, 2012 5:08 pm

Very nice! If you planned on replacing the rear tires, go ahead and start saving your pennies, they are expensive!!
But, with the spacers you have on the rear, you can part ways with them and recoup a good bit! They are IH spacers, but those are in quite a demand for those that want to run dual tires on F-Cubs.
The LoBoy floataion turf tire spacers look like this: http://www.partstree.com/parts/?lc=cub_ ... 0118400071
User avatar
RaymondDurban
Team Cub Mentor
Team Cub Mentor
 
Posts: 4265
Joined: Wed Dec 26, 2007 7:45 pm
Location: FL, Crestview
Zip Code: 32536
Circle of Safety Award
Circle of Safety: Y

Re: New addition to the family

Postby BigBill » Thu Mar 15, 2012 8:08 pm

Congrats nice 184.....

I been buying up tires on ebay. Make sure you look at every page before you buy any tires there. Sometimes there are tires on the last page cheaper. Look at them all first.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
BigBill
5+ Years
5+ Years
 
Posts: 5705
Joined: Sat Jul 22, 2006 5:02 pm
Location: in northern usa
Zip Code: 00000

Re: New addition to the family

Postby gitractorman » Thu Mar 15, 2012 8:14 pm

A word of caution on the spacers. You HAVE to have spacers on the rear wheels to run tire chains on a 184. So, don't just go and sell the spacers to make a few bucks. You'll be sorry you did. Raymond is correct though, the spacers he shows are the correct ones for the 184, and the ones you already have are for a F-cub. Regardless, they both bring about the same prices.
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
User avatar
gitractorman
5+ Years
5+ Years
 
Posts: 2081
Joined: Mon Oct 24, 2005 11:35 am
Location: Grand Island, NY
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Circle of Safety Award
Circle of Safety: Y

Re: New addition to the family

Postby fordyford » Sat Mar 17, 2012 10:48 am

Thanks for the advice on the spacers! Anyone know what the thickness is on the correct ones?

After moving several bucket loads of stone, I've found out that the steering could use power assist.
Anyone ever done this?
fordyford
 
Posts: 44
Joined: Sun Dec 18, 2011 5:25 pm
Zip Code: 37857

Re: New addition to the family

Postby gitractorman » Sat Mar 17, 2012 7:09 pm

I belive the original spacers are 4". Yea, the FEL on a non power steering tractor can be a bit of a workout. One thing to try next time you're on it is to make sure you are always rolling when steering. This will help a bit. I know some of the guys here have added power steering to a lo-boy just for the same reason, so maybe they'll speak up. If I were going to try it, I believe I would try to find a scrapped out Cub Cadet 1864, 1863, or SGT with power steering and try to use those parts. The steering mechanism on a Cub Cadet is very similar to the one used on the lo-boys, so the parts should retro-fit easily.
1951 Farmall Cub, Cub Cadets 102, 104, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller
User avatar
gitractorman
5+ Years
5+ Years
 
Posts: 2081
Joined: Mon Oct 24, 2005 11:35 am
Location: Grand Island, NY
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Circle of Safety Award
Circle of Safety: Y

Re: New addition to the family

Postby outdoors4evr » Mon Mar 19, 2012 9:25 am

Some skinnier (3-rib) tires on the front help immensely with the steering effort.
You will lose floatation with the skinny tires, but being able to steer is a huge plus. It's a must when my 184 is carrying the model 50 snowblower.
184 w/ Creeper & 3-Point
IH Model 15 Tiller
outdoors4evr
5+ Years
5+ Years
 
Posts: 722
Joined: Tue Jul 22, 2008 12:44 pm
Location: Davison, MI
Zip Code: 48423
Tractors Owned: 184

Re: New addition to the family

Postby fordyford » Mon Mar 19, 2012 11:04 am

Thanks for the steering tips! Since the front tires need replacing, I might start looking for another pair of rims and mount the 3-ribs.

I would like to gather some info on the pwr strg conversion, if anybody on here has done it.

And yes, I found out quickly that it needs some forward movement to steer with several hundred pounds of stone in the bucket! :c) Good thing that I'm a young 65! HA!
fordyford
 
Posts: 44
Joined: Sun Dec 18, 2011 5:25 pm
Zip Code: 37857


Return to LoBoy Series - 154, 184, 185

Who is online

Users browsing this forum: No registered users and 2 guests