IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Thu Apr 26, 2012 6:31 pm
I have recently purchased a 154 low boy and got a 3260 mower with it, I have purchased all the missing brackets etc. i needed to mount it but was wondering if anyone had a detailed picture of how it actually mounts to the tractror front and rear, I spoke with a nice fella named hamilton bob and he suggested this question be put out on this forum, any and all help will be greatly appreciated
Thu Apr 26, 2012 11:29 pm
G'day and congrats
on acquiring your 1st new to you Cub
Unfortunately I do not have a lot of information on the Numbered Series Cubs
but I do have a few items. If you follow the Cub-154 Lo-Boy
it will take you to the TC-131 Parts Catalog Revision 8
where you will find the Parts Breakdowns for the various IH Implements available for the 154 such as the IH 3260 Rotary Cutter
. That should be of some assistance in mounting your mower. Sorry I don't have anything else on the Implements.
Fri Aug 09, 2013 10:52 pm
I know this is an older post but I was having the same issue. I was able to find some pictures on line and thought I would share.
- image.jpg (58.47 KiB) Viewed 249 times
- image.jpg (51.55 KiB) Viewed 249 times
Sat Aug 10, 2013 8:53 pm
Well after spending several hours trying to mount my 3260 like the above photos, I still can not attach it like the photo and have it not bind up. I can not seem it put the pin with the spacers in. Any suggestions? Here are some pics as it is sitting right now. The top pic is of the right side if you are sitting on the tractor. Notice the pin is not installed. The second pic is of the left side. It seems to work correctly.
- image.jpg (369.51 KiB) Viewed 233 times
- image.jpg (347.62 KiB) Viewed 233 times
Sat Aug 10, 2013 10:01 pm
Check the hydraulic cylinder centered under the tractor. You may need to get the piston pushed back into the cylinder. To do that you need the weight of the mower. Reality show. I messed up when is removed the deck and cycled the hydraulics - leaving the lower piston extended.
I had the same problem initially mounting my 3260 mower after removal to work on. I wound up using a farm jack to jack up and block one corner of the deck at a time and fastening some brackets. Then moving the jack to another corner and getting a few more brackets - until I could put weight on the hydraulic system to close the center cylinder.
Sat Aug 31, 2013 4:29 pm
On to the next deck issue. Does anyone have a good picture of the belt tensioner? I have a pretty good idea that mine is not on correct.
- image.jpg (420.31 KiB) Viewed 151 times
- image.jpg (373.91 KiB) Viewed 151 times
Sat Aug 31, 2013 7:12 pm
2nd photo. The belt tensioner is a coil type spring that fits under the post on the right side of the photo.
As long as spring, the current system, doesn't rub on the belt or pulley, I'd use it.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.