Need more help--New guy here with 154 troubles

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
ozark
5+ Years
5+ Years
Posts: 12
Joined: Thu May 03, 2012 8:47 am
Zip Code: 00000

Re: Need more help--New guy here with 154 troubles

Postby ozark » Wed Jun 06, 2012 9:03 pm

Got the new shifter fork in and cannot figure out how to get it on. I can get it into the case, underneath the shifting rail, but I can't get it over the rail. Any advice greatly appreciated. I do not want to have to split the tractor.

Jim Becker
Team Cub
Team Cub
Posts: 12993
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: Need more help--New guy here with 154 troubles

Postby Jim Becker » Wed Jun 06, 2012 10:04 pm

Look at this thread. I think it explains how to do it.
http://www.farmallcub.com/phpBB2/viewtopic.php?f=1&t=59477

ozark
5+ Years
5+ Years
Posts: 12
Joined: Thu May 03, 2012 8:47 am
Zip Code: 00000

Re: Need more help--New guy here with 154 troubles

Postby ozark » Wed Jun 06, 2012 10:17 pm

I can easily slide the shifting rail back and forth, but it comes back and hits something solid. I can't move it any further. Any ideas?

ozark
5+ Years
5+ Years
Posts: 12
Joined: Thu May 03, 2012 8:47 am
Zip Code: 00000

Re: Need more help--New guy here with 154 troubles

Postby ozark » Thu Jun 07, 2012 1:31 pm

Got it all figured out and put back together. Gonna eat some lunch and get it all buttoned up and try it out. Hope everything works like it should.

ozark
5+ Years
5+ Years
Posts: 12
Joined: Thu May 03, 2012 8:47 am
Zip Code: 00000

Re: Need more help--New guy here with 154 troubles

Postby ozark » Thu Jun 07, 2012 9:21 pm

Thanks to all of your help i got it all put together and even mowed with it for about fifteen min. The only thing is at times when i try to put it in reverse it may not go until i let the clutch out a little then try again. I adjusted the clutch to where it doesnt grind going into gear now too.
I also tightened up the belt that drives the mower and it seems to mow the thicker grass a little better now.
A big thanks goes out to all that helped me here on this forum.


Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 1 guest