my dad bought a 154
Wed Jun 20, 2012 8:22 pm
that needs a driveshaft and we need lots of advice! 
it runs like a top and has a IH loader mopunted that runs off the pto since this is a numbered i am not familiar with the set up and we need to fix this before my mother scalps my father! where can i find a driveshaft and some manuals for it? thanks
it runs like a top and has a IH loader mopunted that runs off the pto since this is a numbered i am not familiar with the set up and we need to fix this before my mother scalps my father! where can i find a driveshaft and some manuals for it? thanks
Re: my dad bought a 154
Thu Jun 21, 2012 7:42 am
I would recommend a new driveshaft from HamiltonBobsCubs. A lot of the used parts are well worn. While working there, you should also replace the PTO belts.
Re: my dad bought a 154
Thu Jun 21, 2012 7:44 am
And Rudi has the manual posted here on our own *Manuals* section of the forum:
http://www.cleancomputes.com/Cub/Number ... index.html
Hamilton Bob should be able to help out with a drive shaft. Let us know what else you need.
Welcome ot the Greatest forum on Earth (well, on the Internet anyway)
http://www.cleancomputes.com/Cub/Number ... index.html
Hamilton Bob should be able to help out with a drive shaft. Let us know what else you need.
Welcome ot the Greatest forum on Earth (well, on the Internet anyway)