Page 1 of 1

my dad bought a 154

Posted: Wed Jun 20, 2012 8:22 pm
by dirtyred
that needs a driveshaft and we need lots of advice! :lol: it runs like a top and has a IH loader mopunted that runs off the pto since this is a numbered i am not familiar with the set up and we need to fix this before my mother scalps my father! where can i find a driveshaft and some manuals for it? thanks

Re: my dad bought a 154

Posted: Wed Jun 20, 2012 8:24 pm
by Former Member

Re: my dad bought a 154

Posted: Thu Jun 21, 2012 7:42 am
by outdoors4evr
I would recommend a new driveshaft from HamiltonBobsCubs. A lot of the used parts are well worn. While working there, you should also replace the PTO belts.

Re: my dad bought a 154

Posted: Thu Jun 21, 2012 7:44 am
by gitractorman
And Rudi has the manual posted here on our own *Manuals* section of the forum:

http://www.cleancomputes.com/Cub/Number ... index.html

Hamilton Bob should be able to help out with a drive shaft. Let us know what else you need.

Welcome ot the Greatest forum on Earth (well, on the Internet anyway) :D