IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Wed Dec 05, 2012 5:32 pm
I have a 1973 154,problem is when I push in clutch peddle,clutch never stops spinning,if I force it into gear and let out clutch peddle it does not ingage,makes a whining sound,I've had it two years and its been great besides the normal slight grinding of gears when put into gear.i would appreciate any suggestions on a starting point to trouble shooting this problem,Thanks
Wed Dec 05, 2012 9:49 pm
There is a brake that stops the disengaged clutch from turning. Basically when you step on the clutch, the pressure plate releases the clutch disk and the brake is applied to stop the pressure plate. The brake lining resemble two small hockey pucks. Perhaps all that is needed is the brake adjusted and or two new brake lining assemblies.
The gear grinding is caused by a fault some place in the clutch system.
Obtain the 154 parts, service and operator's manual. Parts manual will show an exploded view of the clutch system and the service manual will describe the adjustments.
Fri Dec 07, 2012 1:42 pm
If the clutch does not engage than something else is wrong besides the clutch brake. Look at the whole drive train, adjust the clutch brake as needed but it will not keep the clutch from engaging.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.