Hydraulics on 154

IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.

Re: Hydraulics on 154

Postby outdoors4evr » Thu Mar 14, 2013 2:28 pm

I have a lockout bar for the 3-point hitch if you are interested.
184 w/ Creeper & 3-Point
IH Model 15 Tiller
outdoors4evr
5+ Years
5+ Years
 
Posts: 718
Joined: Tue Jul 22, 2008 12:44 pm
Location: Davison, MI
Zip Code: 48423
Tractors Owned: 184

Re: Hydraulics on 154

Postby Swobee » Mon Mar 18, 2013 9:01 pm

I'm going to have to check this out. So it is possible to lock the 3 pt from operating when the hydraulics are used? Now, if I put the lever in 'lift' position, the 3 pt rises pretty fast, then the snow blade slowly comes up after a pause. I noticed when mowing last summer the deck was pretty slow acting but didn't know if this was normal for a LoBoy or not. Most of my tractor operating was done on much larger mid-late 1960's & 1970's Cas & Allis Chalmers tractors. Their hydraulics were fairly fast and sensitive as I recall. Thanks - Greg
Swobee
 
Posts: 37
Joined: Sat Apr 02, 2011 10:03 pm
Location: Hays, Ks.
Zip Code: 67601
Tractors Owned: Lo Boy 154 '69
IH 54 Snow Blade
3160? Belly Mower
2N Ford
3-pt sweeps
3-pt scoop
sickle mower

Re: Hydraulics on 154

Postby Eugene » Mon Mar 18, 2013 9:13 pm

Locking out the 3-point will speed up the deck movement by quite a bit.

The reason the 3-point moves faster or first is that it is the lightest load. Once the load evens out or the 3-point reaches it's top point, the stop, the hydraulics will move the next lightest load - the deck.
I have an excuse. CRS.
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12500
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Previous

Return to LoBoy Series - 154, 184, 185

Who is online

Users browsing this forum: No registered users and 2 guests