IH CUB LoBoy Series - 154, 184, 185 Discussion Forum
Sat Jan 12, 2013 9:16 pm
I am getting ready to rebuild my carb on my 185 loboy. Everyone on here seems to talk about IH or zenith carbs. My carb says Bendix on it. Anyone run into that variation yet.
Sat Jan 12, 2013 9:54 pm
Bendix carbs are
normal for IH Cubs.
Got a picture
Last edited by Rudi
on Tue Jan 15, 2013 9:00 am, edited 1 time in total.
Reason: ooops :-(
Sun Jan 13, 2013 8:06 pm
I tore the carb off today..and the side facing out says Bendix...but the side of the bowl facing the tractor says zenith. Go figure...Tried to find a model number on it but no luck. I will get a picture later. Camera issues.
Mon Jan 14, 2013 11:12 am
The zenith carbs said bendix on the side. Same thing.
Mon Jan 14, 2013 11:52 pm
Learn something new all the time. Bendix/Zenith Carbs
Tue Jan 15, 2013 8:17 am
The 'Zenith' carb was used on a lot of different machines and was standard on yours. The trick is the information is on a tag that often goes missing. Parts are available from a dealer (C&G on the bottom of the page). I don't know the difference (if any) but it is in the Cub parts manual, they were standard on the long stripe Cub.
Tue Jan 15, 2013 7:30 pm
Yep Rudi, that's the page. I will try to remember to take a look at the one on the 77, if I recall there is a small aluminum tag held on by one of the 4 (or 5, depending on the model) screws that hold the two halves together. I also have one on the Lo Boy.
In my opinion it's a great carburetor. The one thing I have noticed is it's a bit more touchy when the engine is cold than an IH is. But the upside is it's pretty trouble free. And the inlet (part #2) is replaceable. Though not cheap, it was $24 now it's $48.55!!!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.