IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Sun Feb 17, 2013 11:24 pm
I've got a 3 point hitch on a spare 154 Cub Loboy I picked up for parts and a gentleman is supposed to come and get it tomorrow since we use our bigger tractors for 3 point work. I would like to know, aside from the obvious, what I need to remove from the tractor to let the guy have. I want him to get everything he needs to be able to install the 3 point on his 185 LoBoy.
Mon Feb 18, 2013 6:49 am
Hydraulic selector valve(s) and all plumbing for the selector valve(s). Throw in the drive line tunnel cover - it will have the holes to match the number of hydraulic selector valves.
Mon Feb 18, 2013 8:08 am
and about everything on the back of the tractor
Mon Feb 18, 2013 8:13 am
There are a lot of brackets and supports for the 3-point hitch that need to go. All the 1/8" and 1/4" steel that the lower arms attach to go with the 3-point hitch. Might want to compare some pictures of tractors without the 3-point to see what is all added to support this.
You should trade some sheet metal as well. He will be removing some sheet metal to put the 3-point on. The back side of your tractor may look a little bare without it.
Mon Feb 18, 2013 8:50 am
Might be easier just to load your parts tractor on a trailer and haul to purchasers property. Let the purchaser remove all of the needed parts. When purchaser is finished, retrieve the left over, exchanged, parts.
The task will be much "easier" with both tractors sitting side by side. Be a good opportunity to sell any good PTO or other parts parts.
As Boss Hog stated, you will need to strip off just about everything from the dash back.
Mon Feb 18, 2013 10:43 pm
Mon Feb 18, 2013 11:12 pm
Nothing wrong with the parts diagrams, except they do not represent the hydraulics of the tractors on hand. For example, my 154 has two factory installed hydraulic selector valves on the power tunnel sheet metal, and a factory installed quick connect coupling. Some models have a separate relief valve.
You will need the hydraulic parts to make the 3 point work on the intended tractor.
Tue Feb 19, 2013 12:06 am
To add to Eugene's last post: Hydraulic System
Suggest you print off all those pages and take them with you along with your parts 154 to the guy and go from there. As Eugene said, who knows what else you might be able to part with along the way.
Tue Feb 19, 2013 8:31 am
This is why everyone should not be in the parts business.
Thu Feb 21, 2013 12:22 pm
I got it all and they guy is happy. I thank you all for the input on what to include with it other than the obvious. We ended up letting him have a bunch of stuff besides the 3 point just becasuse we wouldn't need it. Thanks again.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.