IH CUB LoBoy Series - 154, 184, 185 Forum -- Questions and answers to all of your LoBoy related issues.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds
or one of our site sponsors for your tractor and parts needs.
Thu Mar 14, 2013 2:30 pm
Is there two different sizes/ diameters on the farmall cub clutch?? I basically want to upgrade the clutch on my int154 from a 3 spring pressure plate to a 6 spring pressure plate. I do not beat on my tractors but i would like a tad more pressure on the disc.
Thu Mar 14, 2013 5:19 pm
you will have to stick with you have. regular cub clutch wont work..
Fri Mar 15, 2013 6:40 am
There isn't really enough horsepower in the 154 to cause a clutch to slip even when it is quite worn. The weak point is in the clutch disc where the 5 rivets connect the center splines to the clutch plate.
Some clutch plates also have cutouts between the disc material and the center splines. I don't know if this additionally weakens the disc, but I can't imagine the cutouts helping.
Sat Mar 16, 2013 8:31 am
The cutouts or slots in the clutch disc keeps the dust from the clutch disc off of the pressure plate and flywheel so it has a good firm grip/squeeze on the clutch disc. Plus it will also throw off moisture/oil too.
I believe there are two different diameters of clutch discs for the fcub.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.