This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
clutches?? interchange ability??
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
clutches?? interchange ability??
Is there two different sizes/ diameters on the farmall cub clutch?? I basically want to upgrade the clutch on my int154 from a 3 spring pressure plate to a 6 spring pressure plate. I do not beat on my tractors but i would like a tad more pressure on the disc.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
-
- 10+ Years
- Posts: 1573
- Joined: Sun Feb 02, 2003 11:01 pm
- Zip Code: 36310
- Tractors Owned: 1975 IH cub,1948 farmall cub,1979 international 3200 skid steer and a 1974 John deere 350B dozer.
- Location: Abbeville Alabama
Re: clutches?? interchange ability??
you will have to stick with you have. regular cub clutch wont work..
Collector of Farmall cubs and cub cadets.Injoy helping people keep their cubs running. Years of experipnce.
-
- 10+ Years
- Posts: 2791
- Joined: Tue Jul 22, 2008 12:44 pm
- Zip Code: 48370
- Tractors Owned: 184
- Location: Oxford, MI
Re: clutches?? interchange ability??
There isn't really enough horsepower in the 154 to cause a clutch to slip even when it is quite worn. The weak point is in the clutch disc where the 5 rivets connect the center splines to the clutch plate.
Some clutch plates also have cutouts between the disc material and the center splines. I don't know if this additionally weakens the disc, but I can't imagine the cutouts helping.
Some clutch plates also have cutouts between the disc material and the center splines. I don't know if this additionally weakens the disc, but I can't imagine the cutouts helping.
184 w/ Creeper & 3-Point
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
IH 3160a Mower
IH Model 15 Tiller
IH-54 Blade
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
Re: clutches?? interchange ability??
The cutouts or slots in the clutch disc keeps the dust from the clutch disc off of the pressure plate and flywheel so it has a good firm grip/squeeze on the clutch disc. Plus it will also throw off moisture/oil too.
I believe there are two different diameters of clutch discs for the fcub.
I believe there are two different diameters of clutch discs for the fcub.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 10 guests