Wed May 15, 2013 4:02 pm
Seems like alot of extra pay in the Steering wheel, are parts avable for these.
Wed May 15, 2013 4:22 pm
Welcome to the Forum!
Yes. All the tie rod ends are available, as are some of the internals to the steering box.
Have you tried to narrow down the source of the play? What about tightening up the steering box adjustment?
Click the link below to "Hamilton Bobs Cubs", loads of parts there.
Wed May 15, 2013 6:32 pm
Yea, chances are that all the tie rod ends and drag link ends are shot. Pretty common and yes, they're available from any Cub Cadet dealer. Also, check the center pivot pin for the front axle, it's know to wear. Also, check the wheel bearings in the front end, along with the spindles. The combination of a little bit of plan in a few of these areas can make the steering feel very sloppy.
Mon May 20, 2013 8:16 pm
Look the steering over , first will adjust the steering box. Notice that I have a bent tie rod also steering lever has play
think I may be able to tighten it .
Thanks for all the help here . My first cub low boy 1969 , loving it.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.