I have a 154 Lo-Boy with a 1050A loader and tonight while I was removing the PTO driven pump to check the level of fluid in the transmission I discovered that one of the ears that the loader pump mounts to the tractor with is broken.
Looks like someone at some point in time tried to fix it with JB weld. While I have used JB weld before I am not sure if this is the place to use it and I am interested in finding a replacement pump. Does anybody know where I might find a replacement or does anybody know the specifications of the stock pump? Searching through the forums didn't yield too many results so any help would be appreciated.
Thanks
1050A Loader Hydraulic Pump
Moderator: Team Cub
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
2 posts
• Page 1 of 1
1050A Loader Hydraulic Pump
by kthering » Sat Jul 06, 2013 10:15 pm
- kthering
- Posts: 1
- Joined: Fri Jul 05, 2013 3:18 pm
- Zip Code: 53506
Re: 1050A Loader Hydraulic Pump
by BigBill » Sun Jul 07, 2013 6:25 pm
Pumps can be found at www.surpluscenter.com or at www.northern hydraulics.com. or search for the model number that's on the pump. If you disassemble the pump the broken ear can be welded I'm sure.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
- BigBill
- 5+ Years
- Posts: 5705
- Joined: Sat Jul 22, 2006 5:02 pm
- Location: in northern usa
- Zip Code: 00000
2 posts
• Page 1 of 1
Return to LoBoy Series - 154, 184, 185
Who is online
Users browsing this forum: No registered users and 2 guests
|
|