Hub City Adapter Plate

Mon Jul 29, 2013 1:33 pm

I have a Hub City Model 22 gearbox that converts a cub PTO (CCW 10 spline) to a standard 540 CW PTO.
The one I have fits a farmall cub and a loboy, but the adapter plate does not appear to match up with the numbered series bolt hole pattern.

Is there a unique adapter plate that fits the numbered series or is my mounting plate on the 184 not correct?
Anybody else have one of these on a numbered series tractor? Got Pic's?

I will probably have to get some pic's of my tractor together to describe this better.

Re: Hub City Adapter Plate

Tue Jul 30, 2013 12:47 pm

The Hub City Model 22 plate is not for the numbered Cubs. Might need different plate to make it work. I had submitted a page from an old Hub City catalog I had that showed the different applications of these boxes. May be in the Cub information system somewhere where Rudi can find it. I will look for the info in my stuff and post again if I can locate it. Good luck, Steve K.

Re: Hub City Adapter Plate

Wed Jul 31, 2013 10:04 am

These threads might be helpful:

Oddities from this last weekend...

Took apart my Hub City model 22 reducer/reverser

Re: Hub City Adapter Plate

Tue Aug 06, 2013 9:37 am

Thank you all for the replies. The links provided by Rudi have been very helpful. :thanx:
The clear as mud :coffee: has now become murky water.