Farmall Cub

I have a Hub City Model 22 gearbox that converts a cub PTO (CCW 10 spline) to a standard 540 CW PTO.
The one I have fits a farmall cub and a loboy, but the adapter plate does not appear to match up with the numbered series bolt hole pattern.

Is there a unique adapter plate that fits the numbered series or is my mounting plate on the 184 not correct?
Anybody else have one of these on a numbered series tractor? Got Pic's?

I will probably have to get some pic's of my tractor together to describe this better.

The Hub City Model 22 plate is not for the numbered Cubs. Might need different plate to make it work. I had submitted a page from an old Hub City catalog I had that showed the different applications of these boxes. May be in the Cub information system somewhere where Rudi can find it. I will look for the info in my stuff and post again if I can locate it. Good luck, Steve K.

These threads might be helpful:

Oddities from this last weekend...

Took apart my Hub City model 22 reducer/reverser

Thank you all for the replies. The links provided by Rudi have been very helpful.
The clear as mud has now become murky water.