Sun Dec 22, 2013 10:51 pm
With the tractor running and the gen/starter disconnected from the reg what voltage should you get half throttle so you
no its ok prior to the reg install..Thanks
Mon Dec 23, 2013 11:21 pm
The largest load on the starter/generator is cranking over, starting the engine. If the starter/generator cranks over the engine, it's working, and will charge.
Tue Dec 24, 2013 8:09 am
If you are testing maximum generator output while the engine is running, ground the F (field) terminal and measure the voltage off the A (armature) terminal. Believe it's supposed to be 16 volts or so.
Fri Dec 27, 2013 7:14 pm
Thats what I was looking for and thats what it reads thank you for the help...
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.