[phpBB Debug] PHP Warning: in file [ROOT]/includes/functions.php on line 4493: ob_start(): output handler 'ob_gzhandler' conflicts with 'zlib output compression'
Farmall Cub • View topic - 154 remote hydraulic valve

Re: 154 remote hydraulic valve

Tue Jan 28, 2014 11:14 am

outdoors4evr wrote:I don't understand why you couldn't add another valve (like the one shown above) in parallel with the current valve?
Hydraulic control valves are typically "wired" in series. Control valves in the neutral position, centered, permit hydraulic fluid to flow through the valve, from the pump to the reservoir.

If you "T" the hydraulic fluid prior to two or more valves. All of the fluid will flow through the control valve(s) in the centered/neutral position and not through the control valve moved into the work position.

Re: 154 remote hydraulic valve

Tue Jan 28, 2014 2:17 pm

I need to add a double acting valve in the system for power angle. Im basically looking for a "power beyond" port on the valve or tie into a line or fitting somewhere. The rest of the plumbing is easy.

Re: 154 remote hydraulic valve

Tue Jan 28, 2014 2:21 pm

Maybe I should look how the hydraulics for loader would be plumbed in?

Re: 154 remote hydraulic valve

Sat Feb 08, 2014 2:55 pm

I might be late,you can put your second valve under the original, put you cannot tie both into your pressure line from the pump , if you pull one lever on the pressure will just go through the other valve, put your second valve on under the top one, run a line from the return on the first valve to the inlet of the second, to you original return line. I would draw a diagram if I knew how to put it on the computer

Re: 154 remote hydraulic valve

Sun Feb 09, 2014 7:17 pm

Thanks for the help : )