Page 1 of 1
Need help with snow plow brackets
Posted: Thu Jan 23, 2014 1:28 pm
by 64/67lo-boy
Im trying to make all the brackets for lifting the snow plow on my 154. I need to know what the thickness is of the plate materials that are used. 1/4 inch or 3/8? Dont want it to be way over kill but also dont want it to be to flimsie either.
Re: Need help with snow plow brackets
Posted: Thu Jan 23, 2014 4:06 pm
by SONNY
I am purdy sure its at least 3/8 thick!---I dont have blade book,---and right now cant get into the cub shed to measure my blade/brackets for sure! thanks; sonny
Re: Need help with snow plow brackets
Posted: Thu Jan 23, 2014 6:21 pm
by Smokeycub
Not sure if this will help, but some good pics of the plow setup.
viewtopic.php?f=31&t=81396
Re: Need help with snow plow brackets
Posted: Thu Jan 23, 2014 8:36 pm
by B Shaver
The short lift rods are 3/8 in X 2 in and the longer rods are 1/4 in X 1 1/2 in wide.
Bill S