My #3 154 has had the clutch slipping ever since I bought it. It doesn't slip in low/low(creeper). It pushes snow with authority. I took off the tunnel cover to find a broken spring in the pressure plate. It seemed to have worn splines too.
We slid the engine forward(late 60's) and took out the drive shaft.
The splines in the clutch disc were worn. The drive shaft is perfect. There were two broken springs in the pressure plate. I was pushing dirt and snow on one spring. I purchased a new flywheel, clutch disc, pressure plate from hamiltonbobscubs again he's a life saver.
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
clutch slipping in high range
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 7388
- Joined: Sat Jul 22, 2006 5:02 pm
- Zip Code: 00000
- Location: in northern usa
clutch slipping in high range
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 7 guests