Re: upgrading into the 70's with a 184

Mon Jun 16, 2014 10:16 am

You can probably get $700-$800 for a complete 3-point in the northeast. Seller beware though, some sheet metal goes with the 3-point. You will need some sheet metal covers back from the buyer to make your 184 complete again.

Re: upgrading into the 70's with a 184

Tue Jun 24, 2014 2:41 pm

outdoors4evr wrote:You can probably get $700-$800 for a complete 3-point in the northeast. Seller beware though, some sheet metal goes with the 3-point. You will need some sheet metal covers back from the buyer to make your 184 complete again.


What sheet metal that covers back? I know the middle section housing where the diverter is. Would the 154 sheet metal fit and would that be the same?

Re: upgrading into the 70's with a 184

Wed Jun 25, 2014 6:49 am

There is a sheet metal cover that wraps behind the PTO. Take a look at a few pictures on the site. The 184, 154 and 185 also use the same sheet metal covers on the rear of the tractor.