Picked up a Cub Loboy, Serial # 011619. Seller said it needed a clutch replacement. Tore it down and have clutch and pressure plate removed. The plate that the pressure plate fastens to (Input shaft on transmission) seems to have an lot of play in it. Is this normal ? Also, I'm not sure which model my Loboy is. I think it's a 185 but I could be mistaken. Any help on identifying the model would be appreciated. Where is the best place to get clutch disk, pressure plate, throw out bearing and bushing?
Thanks,
Hobo
This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
New Owner Here
Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
-
- 10+ Years
- Posts: 4974
- Joined: Fri Oct 29, 2010 11:34 pm
- Zip Code: 36558
- Tractors Owned: Cubs: (3)'49's, (1 is for parts), (1)'57 IH Cub LoBoy w/FH, (2)154 Number Series Loboys, (1 is for parts), '76 Longstripe w/FH, Mowers: C-22, Bush Hog 412, Pennington 59, Woods RM42CF, Woods 42, assorted FCub plows, planters, discs, etc. OTHERS: '49 AC B & Ind. Sickle mower, '61 AC D12 Ser 2, '52 8N, '56 Ferguson 35 Deluxe, '47 & '49 Avery V, '53 MM BG (offset), '51 JD M (regular), '56 JD 420C, with Blade and fire plow, '85 JD 850 (Yanmar) w/72" belly mower, '76? Yanmar 2TR15 1500 & Bush Hog SQ42S-2 mower, '78? FORD Dexta, '86 FORD LGT14D & 48" Mower, (2)Cub Cadets & Mowers (MTD), (4) Sears Surburban's, other MTD mowers, Jeeps & other misc. "treasures"
- Circle of Safety: Y
- Location: AL (Southwest)
Re: New Owner Here
Welcome to the Forum. Number series LoBoy part: Forum Sponsor HAMILTON BOB'S, Offset Loboy Forum Sponsors TM Tractor, JP's, NAPA or other local auto parts, just ask for parts for INTERNATIONAL C60 engine. A picture would help ID your tractor.
Stan in LA (lower AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
USAF & Reserves, Reg ARMY, ARMY NG (AL)
- Glen
- 10+ Years
- Posts: 6095
- Joined: Mon Mar 19, 2012 7:33 pm
- Zip Code: 00000
- Tractors Owned: 1956 Farmall Cub with Fast Hitch, F-11 plow, Disc, Cultivator, Cub-22 mower
- Circle of Safety: Y
- Location: Wa.
Re: New Owner Here
Hi,
If it is a Cub 154 LoBoy, there should be an ID plate on the frame at the left front of the engine. Here is a pic of it. It says the model of the tractor on the plate.
Below is a pic of a 154 LoBoy.
If it is a Cub 154 LoBoy, there should be an ID plate on the frame at the left front of the engine. Here is a pic of it. It says the model of the tractor on the plate.
Below is a pic of a 154 LoBoy.
- Barnyard
- Team Cub
- Posts: 24233
- Joined: Tue Aug 07, 2007 3:39 pm
- Zip Code: 45030
- Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100 - Circle of Safety: Y
- Location: OH, New Haven (Hamilton County)
- Contact:
Re: New Owner Here
You have a 1969 154.
There are two ways to get enough Cubs. One is to continue to accumulate more and more. The other is to desire less.
-
- 5+ Years
- Posts: 6
- Joined: Fri May 26, 2017 7:00 pm
- Zip Code: 59840
Re: New Owner Here
A couple of photos. I'll be needing a clutch setup.
Thanks for your help.
Hobo
Return to “Lo-Boy Series - 154, 184, 185”
Who is online
Users browsing this forum: No registered users and 11 guests