If I want to run a rear mounted hydraulic pump . .

IH CUB Lo-Boy Series - 154, 184, 185 Forum -- Questions and answers to all of your Lo-Boy related issues.

Moderator: Team Cub

Forum rules
Notice: For sale and wanted posts are not allowed in this forum. Please use our free classifieds or one of our site sponsors for your tractor and parts needs.
petesponies
Posts: 28
Joined: Sun Jan 17, 2016 12:47 am
Zip Code: 29596

If I want to run a rear mounted hydraulic pump . .

Postby petesponies » Thu Nov 23, 2017 10:36 pm

is there a specific one that fits a 184 or does everyone need to be adapted/fabricated?
Pete's Ponies
Mustang RUSToration & Performance

Eugene
Team Cub Mentor
Team Cub Mentor
Posts: 17089
Joined: Fri Jul 02, 2004 9:52 pm
Zip Code: 65051
Circle of Safety: Y
Location: Mo. Linn

Re: If I want to run a rear mounted hydraulic pump . .

Postby Eugene » Fri Nov 24, 2017 8:21 am

Most if not all PTO driven hydraulic pumps are for the standard PTO. You can purchase the 10 spline adapter to fit the standard PTO.

What are you planning on using the rear mounted hydraulic pump for?

Edit: Previous discussion on the topic. viewtopic.php?f=31&t=66682
I have an excuse. CRS.

BigBill
10+ Years
10+ Years
Posts: 6487
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: If I want to run a rear mounted hydraulic pump . .

Postby BigBill » Sun Nov 26, 2017 9:02 pm

If I was going to use a rear pto driven hyd pump on my 154 I’d have to belt drive it using two vee belt pullies(double belts). It’s only 1,000rpm not enough for a hydraulic pump to have the correct gpm. I would need at least 2,000rpm, the instructions on the pump will tell you what constant rpm for what pressure.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

User avatar
Shane Nelson
501 Club
501 Club
Posts: 3255
Joined: Wed Nov 22, 2017 6:24 am
Zip Code: 27284
Tractors Owned: .
1947 Circle Cub #1447 (Arnold)
195? Cub
1970 International 140 (Norman)
1949 John Deere A
1972 Schramm Pneumatractor
1993 Ford 4630 W/Loader
1965 John Deere 110
1961 Cub Cadet Original
Circle of Safety: Y
Location: Oak Ridge, N.C.

Re: If I want to run a rear mounted hydraulic pump . .

Postby Shane Nelson » Tue Nov 28, 2017 8:03 am

When you get a pump make sure it turns the same direction as the PTO.
God is good, all the time!
Every home is a school, what are you teaching?
Make prayer a 1st priority, instead of a last resort.
Circle of Safety

BigBill
10+ Years
10+ Years
Posts: 6487
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: If I want to run a rear mounted hydraulic pump . .

Postby BigBill » Wed Nov 29, 2017 8:14 pm

I purchased hydraulic pumps that can turn in either direction.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

Pfranck331
Posts: 37
Joined: Tue Dec 05, 2017 5:03 am
Zip Code: 61201
eBay ID: Greaceandgasoline
Tractors Owned: IH 154 Cub LoBoy 1972

Re: If I want to run a rear mounted hydraulic pump . .

Postby Pfranck331 » Tue Dec 05, 2017 5:58 am

I also would like to know what you will be using it for?

BigBill
10+ Years
10+ Years
Posts: 6487
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: If I want to run a rear mounted hydraulic pump . .

Postby BigBill » Wed Dec 13, 2017 11:10 am

Log Splitter? Front end loader?

Some pumps run at 3,000 rpm to get the correct gpm.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

User avatar
gitractorman
10+ Years
10+ Years
Posts: 2596
Joined: Mon Oct 24, 2005 11:35 am
Zip Code: 14072
eBay ID: toysforjake
Tractors Owned: Lots of Cub Cadets!
1951 Farmall Cub
1977 IH Cub
1966 IH Cub
1965 IH Lo Boy
1964 IH Lo Boy
1949 Farmall Cub
Several IH 154 Lo Boys
1979 IH 184 Lo Boy
Simplicity 4416 Sovereign
Simplicity Conquest
Simplicity Legacy 4x4 Diesel
Mitsubishi MT180D 4x4 Diesel
Circle of Safety: Y
Location: Grand Island, NY

Re: If I want to run a rear mounted hydraulic pump . .

Postby gitractorman » Wed Dec 13, 2017 12:34 pm

The PTO spinning in the opposite direction and at engine speed rather than 540 RPM, kind of rules out trying to use any PTO driven pump readily available. You might consider just using an automobile power steering pump and run it off the fan belt. I know a guy here that uses cubs for digging post holes, and that's what he does..... but he also re-powers them with Chevy 4.3L engines and actually runs 3 or 4 pumps in order to supply the auger, boom cylinders, down riggers, etc. It's quite the setup, but it works.

Remember, if you do use your PTO to run a pump, you limit that machine and prevent it from being able to run a mower. Again, a good reason to go with a belt drive on the engine.
Cub Cadets 682, 1811, 1864, Simplicity Legacy XL 4x4 Diesel with FEL, 60" mower, 50" Tiller

BigBill
10+ Years
10+ Years
Posts: 6487
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: If I want to run a rear mounted hydraulic pump . .

Postby BigBill » Sun Dec 17, 2017 4:29 pm

The int154 pto spins at 1,000rpm. You can get hydraulic pumps that run either direction.
http://www.surpluscenter.com you could possibly use belts on the rear of the pto to get the correct rpm for the pump.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

Jim Becker
Team Cub
Team Cub
Posts: 13801
Joined: Sun Feb 02, 2003 2:59 pm
Zip Code: 55319
Circle of Safety: Y
Location: MN

Re: If I want to run a rear mounted hydraulic pump . .

Postby Jim Becker » Sun Dec 17, 2017 9:45 pm

BigBill wrote:The int154 pto spins at 1,000rpm. You can get hydraulic pumps that run either direction.
http://www.surpluscenter.com you could possibly use belts on the rear of the pto to get the correct rpm for the pump.

1,800 RPM

BigBill
10+ Years
10+ Years
Posts: 6487
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: If I want to run a rear mounted hydraulic pump . .

Postby BigBill » Mon Dec 18, 2017 7:51 pm

Your right I couldn’t remember if it was 1,000 or 1,800rpm. Brain fade at old age. To hit a 3,000rpm pump speed a 3 to 1 ratio on the belt pullies.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.

BigBill
10+ Years
10+ Years
Posts: 6487
Joined: Sat Jul 22, 2006 5:02 pm
Zip Code: 00000
Location: in northern usa

Re: If I want to run a rear mounted hydraulic pump . .

Postby BigBill » Thu Dec 21, 2017 7:49 pm

I been thinking of installing a fcub pto in the 154 tranny to run the back hoe. This way the 154 pto setup won’t get the abuse.
I'm technically misunderstood at times i guess its been this way my whole life so why should it change now.


  • Similar Topics
    Replies
    Views
    Last post

Return to “Lo-Boy Series - 154, 184, 185”

Who is online

Users browsing this forum: No registered users and 2 guests