Page 1 of 1
Chop Saw
Posted: Tue Feb 16, 2010 8:50 am
by Jeff Silvey
Well I was making some of those table cloth clamps on Sunday. I was using a chop saw which make a lot better cut. When I raised it up the guard did not come back far enought to protect the blade. I didn't see that till I reached in to get something out of the way and the blade decided to cut other things other than the pipe. I said you
. It wasn't bad but I went inside to get something the boss said what did you do. I said I had my head some where else beside's on what i was working on.
Just be
CAREFUL Be SAFE
Jeff
Re: Chop Saw
Posted: Tue Feb 16, 2010 8:56 am
by Bill Hudson
Ouch!!! I'm glad it wasn't serious.
Bill
Re: Chop Saw
Posted: Tue Feb 16, 2010 9:51 am
by Rudi
Jeff:
Glad you are ok and it wasn't too too serious. Safety in the shop hopefully is always first and foremost on the mind.. but you know.. sometimes stuff happens.. and that is when you get hurt
BTDT... the only thing that hurts worse than the finger, is the pride
-- plus every time somebody mentions Tool Time.. what do they bring up
yup, you got it..
Re: Chop Saw
Posted: Tue Feb 16, 2010 10:00 am
by Barnyard
Does this mean you won't have to "paint" them red as Ellen suggested. They will now be naturally stained that color. Hope you heal well. Those things have a heck of a bite to them.
Re: Chop Saw
Posted: Tue Feb 16, 2010 6:53 pm
by johnny j
Jeff ! Thanks for the warning. You can't be to careful.