Anything that might not belong on the other message boards!
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
Wed Oct 20, 2004 10:43 am
I have a 10X12 metal shed which shows more rust than paint. I have nothing against rust, it complements the color of the autumn leaves in the background. My wife feels differently so I am going to paint before winter arrives. Is there a primer which will bond with and neutralize the rust so that it won't bleed through the paint. I plan to do a quick wire brush job but don't want to expend time and effort which would be required to really clean it well before applying primer. Will Rustoleum primer do the job. If not, what will work. Thanks, Dan
Wed Oct 20, 2004 12:02 pm
POR-15 makes one, but I don't think it's practical for this applicatiuo, plus I don't think it's all that great. I used to buy a rusty metal primer from Orscheln, maybe Van Sickle brand. Failing to find that I would probably go to the red oxide primer or zinc chromate. Be sure to get all the tree sap off with TSP or something similiar.
Fri Oct 22, 2004 1:02 pm
Phosphoric (I think that is how it is spelled AKA "Ospho") Acid is a rust killer that converts rust in to a primer. I usually buy mine from a paint shop such as Sherman Williams or maybe home depot. This stuff works great I just spray it on with a bug sprayer and let set for a while, then rinse with water. It is also environmentally safe and can be found in
coke-a-cola. It will also clean your metal prior to painting because it eats dirt and calcium. It will turn all rust black and is what is used to create rot iron. About $20.00 a gallon and can be cut with water up to 50/50 and still do a great job.
In my opinion, it is the best way to go especially on a large project.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.