Steve
Parts cleaner?
Moderator: Team Cub
Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.
Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.
The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."
MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
5 posts
• Page 1 of 1
Parts cleaner?
by Steve Butram » Sat Jan 01, 2005 9:15 pm
Would this make a good parts cleaner ?It is labled Decarbonizer. What solution was uesed in this tank?
Steve
Steve
Co- hosting Central Indiana Cub Fest near Tipton Indiana September 20-21,2012
-
Steve Butram - Cub Pro
- Posts: 1837
- Joined: Mon Feb 17, 2003 7:53 am
- Location: IN West Lafayette
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
1948 with 1 arm loader and power steering
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo 
- Circle of Safety: Y
by Bigdog » Sat Jan 01, 2005 9:24 pm
Steve, a web search show that they were used to clean stainless steel, aluminum and cast iron. Might be useful.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
by Steve Butram » Sat Jan 01, 2005 9:40 pm
Thanks Bigdog What solution should I use in It?
Co- hosting Central Indiana Cub Fest near Tipton Indiana September 20-21,2012
-
Steve Butram - Cub Pro
- Posts: 1837
- Joined: Mon Feb 17, 2003 7:53 am
- Location: IN West Lafayette
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
1948 with 1 arm loader and power steering
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo - Circle of Safety: Y
by Bigdog » Sat Jan 01, 2005 9:49 pm
I was just checking some of the links from the search and it looks like it could be some kind of dishwasher!!!! Can't say for sure.
Bigdog
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
If you can't fix it with a hammer, you've got an electrical problem.
My wife says I don't listen to her. - - - - - - - - Or something like that!
http://www.cubtug.com
-
Bigdog - Team Cub
- Posts: 23786
- Joined: Sun Feb 02, 2003 12:50 pm
- Location: OH, Stoutsville
- Zip Code: 43154
- Circle of Safety: Y
by Steve Butram » Sat Jan 01, 2005 10:04 pm
I'm positive it was used for soaking parts I think i'm going to buy some parts cleaning solution for it and try it out. I picked it up at an auction and thought it would be nice to soak big parts it also has a drain on the end to clean it out . Thanks big dog Steve.
PS i'm having problems posting pix i got this posted but I have more to share but I just cant get the procedure down.I know you posted the procedure could you send me the link? ?Thanks Steve
PS i'm having problems posting pix i got this posted but I have more to share but I just cant get the procedure down.I know you posted the procedure could you send me the link? ?Thanks Steve
Co- hosting Central Indiana Cub Fest near Tipton Indiana September 20-21,2012
-
Steve Butram - Cub Pro
- Posts: 1837
- Joined: Mon Feb 17, 2003 7:53 am
- Location: IN West Lafayette
- Zip Code: 47906
- eBay ID: steveb05
- Tractors Owned: 1947 in well used condition
1948 restored
1948 with 1 arm loader and power steering
1949 for sale
Nice original 1950 just out of the Demo Range
628 2 wheel Trailer
1950 Demo - Circle of Safety: Y
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests
|
|