Switch to full style
Anything that might not belong on the other message boards!

Forum rules

1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
Post a reply

sand blaster getting stopped up

Fri Jul 13, 2012 7:02 pm

what have yawl found to be the best abrasive that does not get clogged up in a blast cabinet?
I am having problems with mine getting clogged and I have a water trap on it too . using black diamond right now

Re: sand blaster getting stopped up

Fri Jul 13, 2012 7:16 pm

Cecil just complained to me, about his blaster. Seems the humidity is too much for the water traps to handle. Cecil uses the black grit, from Tractor Supply. Don't know if some other grit would be better. Ed

Re: sand blaster getting stopped up

Fri Jul 13, 2012 9:18 pm

Thats what I use too Ed

Re: sand blaster getting stopped up

Fri Jul 13, 2012 10:21 pm

I use black beauty, and have tried various water traps that still allowed enough moisture through to routinely plug the nozzle. I switched to a dessicant dryer that I got from McMaster-Carr (see below link)
http://www.mcmaster.com/#desiccant-air-dryers/=ie9lfw
I have the one with the zinc body and polycarbonate bowl, and it works great. The nice thing about these dryers is the desiccant can be removed and dried in an oven and used again. I've had mine for about a year and have only removed the desiccant and dried it once.
Post a reply