Valuable Resource for DIY Electrical Work

Anything that might not belong on the other message boards!

Moderator: Team Cub

Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.

Valuable Resource for DIY Electrical Work

Postby lazyuniondriver » Thu Nov 15, 2012 4:57 pm

For those of you that do your own electrical work around the house or farm, I stumbled across this gentleman several years ago who over the last decade has built a really good training resource for both professional and do it yourselfer electricians.

You can keep up to speed of the latest NEC, buy training materials, or browse or participate in the forums with simple or complex questions.

Not being a licensed electrician but capable of performing all phases of electrical work under the supervision of a license holder has made this website a very valuable go to resource for me in calculating capacity, wire size, load, etc. for various projects I undertook that were a little more complicated than the usual 15/20A , 12/14ga wire scenarios.

http://www.mikeholt.com/
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Image
lazyuniondriver
Cub Star!!
Cub Star!!
 
Posts: 438
Joined: Tue Aug 07, 2012 1:37 am
Location: Southern Suburbs of Cleveland, Ohio
Zip Code: 44134
Tractors Owned: 1949 & 1951 Farmall Cubs

Several Snapper Garden Tractors
Circle of Safety Award
Circle of Safety: Y

Return to Off Topic

Who is online

Users browsing this forum: No registered users and 4 guests