Watch Pistons Running at 10,000 RPM to the End

Anything that might not belong on the other message boards!

Moderator: Team Cub

Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.

Watch Pistons Running at 10,000 RPM to the End

Postby lazyuniondriver » Wed Nov 21, 2012 5:35 pm

This is interesting.

Some kids with too much time on their hands, a beater, a camera, and a tow chain.

Enjoy.

https://www.youtube.com/watch?v=j8gvgIS ... ata_player
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Image
lazyuniondriver
Cub Star!!
Cub Star!!
 
Posts: 438
Joined: Tue Aug 07, 2012 1:37 am
Location: Southern Suburbs of Cleveland, Ohio
Zip Code: 44134
Tractors Owned: 1949 & 1951 Farmall Cubs

Several Snapper Garden Tractors
Circle of Safety Award
Circle of Safety: Y

Re: Watch Pistons Running at 10,000 RPM to the End

Postby Bob Perry » Wed Nov 21, 2012 6:22 pm

Kind of reminds me of my welder-generator, we ran it with one of the heads off !

REMEMBER: Keep it correct or you may face the

Image
User avatar
Bob Perry
5+ Years
5+ Years
 
Posts: 1838
Joined: Sun Feb 22, 2009 3:30 pm
Location: Dartmouth, Massachusetts
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.

Re: Watch Pistons Running at 10,000 RPM to the End

Postby tmays » Wed Nov 21, 2012 6:57 pm

Bob Perry wrote:Kind of reminds me of my welder-generator, we ran it with one of the heads off !



I gots to know. Why?
Thomas
User avatar
tmays
501 Club
501 Club
 
Posts: 1587
Joined: Wed May 11, 2011 8:59 pm
Location: Raymond, MS
Zip Code: 39154
Tractors Owned: 1972 Cub
1947 Cub
1952 Cub
152 plow
1953 Farmall Super C
154 Cub Loboy
44 LB Woods mower
23A disk
144 Cultivators
Poplarville disc
54A blade
Gaylott scoop
193 Moldboard plow
Cub 22 mower
Woods 42
IH C-2
174 Planter/Fertilizer
Rotary Hoe

Re: Watch Pistons Running at 10,000 RPM to the End

Postby Bob Perry » Wed Nov 21, 2012 7:07 pm

Good question, just 2 1/2 years and I can't remember! I was probably trying to figure out what's wrong with it, if there's a load on this motor (welding) it gets hot and loses power. It's in the shed and it still sits on the "to do" list.
REMEMBER: Keep it correct or you may face the

Image
User avatar
Bob Perry
5+ Years
5+ Years
 
Posts: 1838
Joined: Sun Feb 22, 2009 3:30 pm
Location: Dartmouth, Massachusetts
Zip Code: 02748
Tractors Owned: :

1949 Farmall Cub / FH

1951 Farmall Cub / IH mower

1964 International Cub Lo-Boy / Woods 59 mower

1967 International Cub / FH

1946 Farmall H

1949 Farmall H

a doodle bug

More than a dozen Cub Cadets running plus a few in the bone-yard

.

Re: Watch Pistons Running at 10,000 RPM to the End

Postby lazyuniondriver » Wed Nov 21, 2012 9:04 pm

Bob Perry wrote:Kind of reminds me of my welder-generator, we ran it with one of the heads off !


Maybe those kids saw your video and got the idea!

Would have been cool to watch stuff like this while I was learning to be a mechanic... Much better than the slow motion animated stuff they showed us narrated by the Department of Defense dude with the monotone voice.
"HAVE ALL YOUR DELIVERIES MADE BY UNION DRIVERS"
Image
lazyuniondriver
Cub Star!!
Cub Star!!
 
Posts: 438
Joined: Tue Aug 07, 2012 1:37 am
Location: Southern Suburbs of Cleveland, Ohio
Zip Code: 44134
Tractors Owned: 1949 & 1951 Farmall Cubs

Several Snapper Garden Tractors
Circle of Safety Award
Circle of Safety: Y


Return to Off Topic

Who is online

Users browsing this forum: No registered users and 1 guest