New tool for the Bash!

[Barnyard]

Took a little nine hour round trip ride into Bill Hudson's territory today and picked up a big box.


Under the cover of darkness we opened the box and unloaded the contents into the shop.


This should come in real handy at the Bash next month.

[Bill Hudson]

I think you're gonna like it!

Bill

[dgrapes59]

Sweet!

I will be glad to help you break it in!

[Winfield Dave]

Giant Easy-Bake Oven ??

[Scrivet]

A DONUT MACHINE? Powered from the left hole in front, glazed on the right, window for viewing?

[Mr E]

Nice !!!


No more wire brushing the steps, eh.

[Barnyard]

I think you're gonna like it!

Bill

Thanks for recommending them back in September.

I will be glad to help you break it in!

I will probably have it broke in well before the Bash, but you are welcome to it whenever needed.

Nice !!!

Roy, I'm glad you had a similar one at DSCF, it convinced me to go with this type.

This one is a Skat Blaster Model 976 from TP Tools in Canfield Ohio. Made in the USA right at their location. It is big enough to hold a Cub hood or rear tire so it will do for just about anything I throw at it. I also picked up the optional extension that attaches to the left side which gives it an additional 16 inches of length for anything longer than a Cub hood.

[Gary Dotson]

Very nice, Bill! You're going to like it a lot! TP is well known for top quality cabinets and their service on parts & supplies is second to none. Even though my cabinet did not come from them, my parts & supplies do.

[ScottyD'sdad]

Tp makes top quality stuff, and are good to deal with. Ed

[Barnyard]

TP is well known for top quality cabinets and their service on parts & supplies is second to none.

Tp makes top quality stuff, and are good to deal with. Ed

Gary and Ed - There is no doubt in my mind on that! When I was looking over there website Sunday I decided to get the caster assembly so I can move it around to clean and such.


I could have made a set, but they would never look like they belonged so I gave TP a call. I first talked to the lady about 1:30 yesterday afternoon to place the order. They have a standard set and an extra high set. Thinking that since I have the extra high cabinet, I needed the extra high set. After I got the email confirmation I notice that the extra high set actually meant that it raised the cabinet an extra height and not actually needed for the extra high cabinet. I called back at 2:15 and the lady confirmed that was the case. She said there was no problem and made the change and sent my new confirmation. A couple hours after that I received a UPS tracking number.

This morning I checked the tracking number and saw this:


Just awhile ago the dogs started carrying on so I went out to see who was here. When I got to the door I saw the brown truck headed out the drive and my package was by the garage door.

Hard to believe the order went out yesterday afternoon and they got it on a truck before they closed. Start to finish in less than twenty four hours. I like this outfit.