Back to Work getting closer

Anything that might not belong on the other message boards!

Moderator: Team Cub

Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.
User avatar
Jeff Silvey
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 4100
Joined: Tue Jun 07, 2005 2:30 pm
Zip Code: 46055
Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines
Circle of Safety: Y
Location: IN, McCordsville

Back to Work getting closer

Postby Jeff Silvey » Sat Jun 21, 2014 8:13 am

Most people know that I have been having trouble with the old knee from firefighting. I had surgery in January. This is all on a workman comp claim. Most of you know I work for Indianapolis FD. I have been dealing with the problem sense last April. My folder is getting bigger. I have been on light duty for most of the time. I did all the therapy that was required. I got released by the ortho doc last week via doing their testing.. I have several hoops I have to jump through (that's going to hurt) :) . First one is my physical I took it this week I passed. Next is my WPE, (work performance evaluation). That's where I messed the old knee up. I hope I get through the course. I have 15 months to go till I retire but who's counting. :wink:
In my line of work
" EVERYBODY GOES HOME THE NEXT MORNING"

Billy Fussell
5+ Years
5+ Years
501 Club
501 Club
Posts: 678
Joined: Fri Feb 16, 2007 11:28 am
Zip Code: 75959
Location: Tx., Milam

Re: Back to Work getting closer

Postby Billy Fussell » Sat Jun 21, 2014 8:40 am

Hang in there. 15 months is not THAT long.

Billy

User avatar
Barnyard
Team Cub
Team Cub
501 Club
501 Club
Posts: 19944
Joined: Tue Aug 07, 2007 3:39 pm
Zip Code: 45030
Tractors Owned: At This Time
40 Farmall Cubs (Round Hood)
2 Farmall Cub (Square Hood)
2 IH Cubs (Square Hood)
5 Lo-Boys (Round Hood)
2 Lo-Boys (Square Hood)
2 Farmall 404's
1 Farmall H
1 Ferguson 20
1 Cub Cadet 125
1 Kubota B-7100
Circle of Safety: Y
Location: OH, New Haven (Hamilton County)

Re: Back to Work getting closer

Postby Barnyard » Sat Jun 21, 2014 8:41 am

Jeff Silvey wrote:I have 15 months to go till I retire but who's counting.

You! :lol:
It is common sense to take a method and try it. If it fails, admit it frankly and try another. But above all, try something.
- Franklin D. Roosevelt -

Circle of Safety

User avatar
John *.?-!.* cub owner
Team Cub Guide
Team Cub Guide
501 Club
501 Club
Posts: 21532
Joined: Sun Feb 02, 2003 2:09 pm
Zip Code: 63664
Tractors Owned: 47, 48, 49 cub plus Wagner loader & other attachments. 41 Farmall H.
Location: Mo, Potosi

Re: Back to Work getting closer

Postby John *.?-!.* cub owner » Sat Jun 21, 2014 9:03 am

Glad to know you are doing better. Recovering from a major joint surgery is challenging, as I learned a few years ago.
If you are not part of the solution,
you are part of the problem!!!

User avatar
John(videodoc)
10+ Years
10+ Years
501 Club
501 Club
Posts: 6532
Joined: Mon Jul 25, 2005 10:16 pm
Zip Code: 61944
Tractors Owned: -
55 F-Cub - snow plow and chains
3 Demonstrators Restored.
"Bette" - 22 mower
"Roxie" - 144 Complete Cults'
"Sandy"(Done) 193 Plow
1950 Demo, "Billie"
-(Woods 59")
Corn Stalk Cutter
23a Disc
&
2005 Mahindra w/FEL
Circle of Safety: Y
Location: IL, Paris just off of Interstate 70

Re: Back to Work getting closer

Postby John(videodoc) » Sat Jun 21, 2014 4:48 pm

GOOD LUCK OLE BUDDY

User avatar
Mike in Louisiana
10+ Years
10+ Years
501 Club
501 Club
Posts: 5523
Joined: Tue Feb 15, 2005 10:10 am
Zip Code: 71023
Circle of Safety: Y
Location: LA, Doyline

Re: Back to Work getting closer

Postby Mike in Louisiana » Sun Jun 22, 2014 8:40 am

John(videodoc) wrote:GOOD LUCK OLE BUDDY


John you misspeled one word, you ment "OLD" right?????????????
1975 cub (LouAnn) serial # 245946, 1941 John Deere Model H

Good judgment comes from experience,
and a lot of that comes from bad judgment. Will Rogers

User avatar
Bezirk
5+ Years
5+ Years
501 Club
501 Club
Posts: 1767
Joined: Fri Mar 27, 2009 10:07 pm
Zip Code: 22843
Tractors Owned: Farmall Cub 1949, Oliver OC3 crawler 1951, Ford 8 N 1948, Oliver 77 Row Crop 1953, JohnDeere, La, 1941, John Deere 4115/w loader, 2004, John Deere stationary power unit LUC, Farmall M, 1946, Oliver 77 Row crop w/ loader
Circle of Safety: Y

Re: Back to Work getting closer

Postby Bezirk » Sun Jun 22, 2014 11:57 am

Jeff I am glad you are recovering, wish you the best, hope to see you at TUG.

Berlin
I started out with nothing and now I only have half of that left !

Bob McCarty
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 7590
Joined: Tue May 25, 2004 8:02 pm
Zip Code: 80501
Tractors Owned: Cubs, MH Pony, Shaw, Allis G, 1934 Silver King, JD LA and LI, Gibson D, David Bradley Tri-Trac
Circle of Safety: Y
Location: CO, Longmont

Re: Back to Work getting closer

Postby Bob McCarty » Sun Jun 22, 2014 2:09 pm

Jeff, I thought being the engineer was "light duty". :D

Bob
"We don't need to think more,
we need to think differently."
-Albert Einstein

User avatar
Denny Clayton
10+ Years
10+ Years
501 Club
501 Club
Posts: 4122
Joined: Wed Feb 05, 2003 1:18 pm
Zip Code: 45365
Tractors Owned: Home to "Rusty", the 2007 and 2009 Cub Tug Champion.
Circle of Safety: Y
Location: OH, Sidney

Re: Back to Work getting closer

Postby Denny Clayton » Sun Jun 22, 2014 5:52 pm

Jeff, if you get off light duty you'll have to get the saw out again and cut another finger! :shock: :roll:
'61 Lo-Boy
'60 FH Lo-Boy
'60 Lo-Boy
'57 FH Cub "Rusty"
'48 Cub
C-3 mower, FH Woods 42F, 54A blade, L-54 blade, 194 plow, FH L-38 disk, FH LB disk, 144 cultivators, FH platform carrier

User avatar
Jeff Silvey
Team Cub Mentor
Team Cub Mentor
501 Club
501 Club
Posts: 4100
Joined: Tue Jun 07, 2005 2:30 pm
Zip Code: 46055
Tractors Owned: -
1950 Demo,1956 w/ FH, 1959 w 59" mower,
Cub L-54 Blade,152 Plow
189 plow, LF 194 Plow, Woods 42" Mower,
Choremaster Garden tractors & Implements
Antique Gas engines
Circle of Safety: Y
Location: IN, McCordsville

Re: Back to Work getting closer

Postby Jeff Silvey » Sun Jun 22, 2014 7:07 pm

Denny Clayton wrote:Jeff, if you get off light duty you'll have to get the saw out again and cut another finger! :shock: :roll:


Denny I didn't like that problem. Wow. Hope that wont happen again.
In my line of work

" EVERYBODY GOES HOME THE NEXT MORNING"

User avatar
sdurnal
5+ Years
5+ Years
501 Club
501 Club
Posts: 848
Joined: Thu May 06, 2010 1:36 pm
Zip Code: 47201
Tractors Owned: 105 & 127 cadet (sacrificed for a 4wd project)

680 Cadet
1964 LoBoy FH
L-54A Blade
Pennington 3 spindle deck
LF-194 plow
Circle of Safety: Y
Location: IN, Columbus

Re: Back to Work getting closer

Postby sdurnal » Mon Jun 23, 2014 7:21 am

Hang in there, Jeff! All us "younger" guys need a strong role model....


Return to “Off Topic”

Who is online

Users browsing this forum: No registered users and 0 guests