SEAL LOCK Products

Anything that might not belong on the other message boards!

Moderator: Team Cub

Forum rules
1. Keep it clean.
2. Keep the discussion civil.
3. Name calling is not allowed.

Politics and religion are two topics that tend to degenerate into a violation of one of the three simple rules above.

The mods and the site admin reserve the right to "lock" or "delete" any discussion that in our opinion, is "heading in the wrong direction."

MOST of all, be respectful of your fellow Cubber's opinions. Don't expect to change someones belief system from a simple forum on the internet.

SEAL LOCK Products

Postby johnbron » Wed Aug 17, 2005 6:31 pm

Has anybody on board ever used these products :?: They have what seems to be many neat fix-it solvers that we all could use in our Cub hobby. I have never heard of this product before and dont know where it retails.


http://www.workin4u.com/seallock/fw.htm
Then came Bronson
User avatar
johnbron
CubPro Emeritus
 
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Location: Puyallup, WA.

Postby Bruce Sanford » Wed Aug 17, 2005 8:00 pm

That sounds too good to be true. I have a crack in my block on the Cub,which opens up when the engine is hot.But it might be worth checking out. 8) :) Bruce :roll:
owner of 48 fcub 34206 Cub cadets 108/102 with mower,snow thrower and blade
Bruce Sanford
Cub Star!!
Cub Star!!
 
Posts: 309
Joined: Sat Aug 07, 2004 11:08 am
Location: Enfield Nova Scotia

Postby Eugene » Wed Aug 17, 2005 10:10 pm

I posted your question on the Unofficial Allis board. There are a number of very active board members from Australia and New Zealand. Should have a response back in a day or two.

Looks like a neat product - if it works.

Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12131
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Postby johnbron » Wed Aug 17, 2005 11:03 pm

Eugene wrote:I posted your question on the Unofficial Allis board. There are a number of very active board members from Australia and New Zealand. Should have a response back in a day or two.

Looks like a neat product - if it works.

Eugene


Eugene, Let us know if you get any good reports on it and where it can be bought. I did not see any info on there web-site of where/how to purchase it.
Then came Bronson
User avatar
johnbron
CubPro Emeritus
 
Posts: 2809
Joined: Sun Feb 02, 2003 2:31 am
Location: Puyallup, WA.

Postby Eugene » Wed Aug 17, 2005 11:10 pm

About two hours later. Received a response on the Allis BB. The reponse is from a very knowledgable Australian mechanic/farmer/antique tractor owner/repairer.

"never seen it either, the only seal-lock i have seen is used in the concrete industry ?"

Went to the sites home page. A cracked block, stitch repair kit, costs $390-.

Perhaps, more information follows.

Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12131
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Postby Eugene » Wed Aug 17, 2005 11:14 pm

Another response from a tractor mechanic in Oklahoma.

"I been using it quiet some time for installing cylinder sleeves and valve seat inserts. The reason I use it is for good heat transfer. Never have tried it on cracks. It seems to be good stuff."

Will try to find the distributor.

Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12131
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y

Postby Eugene » Wed Aug 17, 2005 11:32 pm

The manufacturer is Silver Seal. The web site is:

http://www.angelfire.com/biz/seallock/

Eugene
Eugene
Team Cub Mentor
Team Cub Mentor
 
Posts: 12131
Joined: Fri Jul 02, 2004 9:52 pm
Location: Mo. Linn
Zip Code: 65051
Circle of Safety Award
Circle of Safety: Y


Return to Off Topic

Who is online

Users browsing this forum: No registered users and 1 guest