This site uses cookies to maintain login information on FarmallCub.Com. Click the X in the banner upper right corner to close this notice. For more information on our privacy policy, visit this link: Privacy Policy
NEW REGISTERED MEMBERS: Be sure to check your SPAM/JUNK folders for the activation email.
if that is 4 inch pipe at about 5 foot long the pipe would be around 55 Lbs, and if the round stock you weld on 3/8 by about 3 inch I would the round stock would be around 10 Lbs, and the ends you welded in 10 Lbs each, So my guess is around 84 to 100 Lbs. And by the way you do great work.
I was thinking we were just voting on the roller with the spikes, not all the other parts, thats what I get for trying to think, LOL any way that is some real good work there, I wish my welding was still that good, In my younger days I welded on Subs in the navy, if you seen my welding now days you would ask me if the Subs came back up, They Did, My eyes are getting bad and to put down a good looking weld I have to have a Few Drinks,